EXAR USB to UART Evaluation Board, XR21B1411IL-0A-EB

  • RS Stock No. 736-0766
  • Mfr. Part No. XR21B1411IL-0A-EB
  • Manufacturer EXAR
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

XR21B1411 UART-USB evaluation board

The XR21B1411 is an enhanced Universal Asynchronous Receiver and Transmitter (UART) with a USB interface. The USB interface is fully compliant to Full Speed USB 2.0 specification that supports 12Mbps USB data transfer rate. The USB interface also supports USB suspend, resume and remote wakeup operations.

±15kV HBM ESD on USBD+/USBD-
USB 2.0 Compliant, Full-Speed (12Mbps)
Supports USB suspend, resume and remote wakeup operations
Unique pre-programmed USB serial number
Enhanced UART Features
Fractional Baud Rate Generator
128byte TX FIFO
384byte RX FIFO
7, 8 or 9 data bits
1 or 2 stop bits
Odd, even, mark, space or no parity
Automatic Hardware (RTS/CTS or DTR/DSR) Flow Control
Automatic Software (Xon/Xoff) Flow Control
Multidrop mode
Auto Transceiver Control
Half-Duplex mode
Selectable GPIO or Modem I/O
Internal 48MHz clock with clock divisors programmable down to 6MHz
Single +5V power supply
5V tolerant inputs

Specifications
Attribute Value
Interface Function USB to UART
Kit Classification Evaluation Board
14 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 35.76
(exc. GST)
$ 41.12
(inc. GST)
units
Per unit
1 +
$35.76
Related Products
Mikro. Elektronika has designed a range of boards ...
Description:
Mikro. Elektronika has designed a range of boards to add new functions and enhance the development of your applications using the mikroBUS™ pinout standard socket. All in one click!Click™ boards can add a range of sensing, Bluetooth, Wi-Fi, extra memory, ...
The LC231X module provides a low cost USB ...
Description:
The LC231X module provides a low cost USB to UART bridge using the FT231X IC to transfer data at up to 3M Baud. Ideal for programming Arduino Pro, ESP modules etc., the pinouts follow the industry standard FTDI TTL cable ...
RS485 2 click carries the MAX3471 half-duplex transceiver ...
Description:
RS485 2 click carries the MAX3471 half-duplex transceiver intended for lithium battery-powered RS-485/RS-422 applications. The click is designed to run on either 3.3V or 5V power supply. It communicates with the target microcontroller over UART interface with additional functionality provided ...
The MCP1663 USB programmable power supply reference design ...
Description:
The MCP1663 USB programmable power supply reference design was developed to provide a versatile and easy to use solution for engineers. It easily transforms a typical computer’s USB port into a variable output power supply capable of supplying 2.5V to ...