- RS Stock No.:
- 361-1603
- Mfr. Part No.:
- B8LCR 230VAC
- Brand:
- Broyce Control
Discontinued product
Alternative
This product is not currently available. Here is our alternative recommendation.
- RS Stock No.:
- 361-1603
- Mfr. Part No.:
- B8LCR 230VAC
- Brand:
- Broyce Control
Legislation and Compliance
- COO (Country of Origin):
- GB
Product Details
Liquid Level Controller, Plug In Base
Controls maximum and/or minimum levels of conductive liquids
Pump-up or Pump-down modes selectable via switch
Adjustable sensitivity, 5 to 100kΩ
One or two probe operation
Low voltage, ac current across probes prevents electrolysis phenomena
Ambient temperature; -20 to + 60°C
Dimensions; H89mm x W40mm, x D92mm
Pump-up or Pump-down modes selectable via switch
Adjustable sensitivity, 5 to 100kΩ
One or two probe operation
Low voltage, ac current across probes prevents electrolysis phenomena
Ambient temperature; -20 to + 60°C
Dimensions; H89mm x W40mm, x D92mm
Note
1. If using metal tank, connect pin 1 and earth to the tank
2. If supply is interrupted for ≤0.5s in pump-up mode, the relay will energise immediately.
In pump-down mode relay remains de-energised
3. For single probe operation, link terminals pin 1 and pin 7
2. If supply is interrupted for ≤0.5s in pump-up mode, the relay will energise immediately.
In pump-down mode relay remains de-energised
3. For single probe operation, link terminals pin 1 and pin 7
Approvals
UL recognised component for Canada and US
Liquid Level Relays are used to monitor the levels of conductive liquids, and are available in Up/Down, Minimum, Maximum, and Fill/Empty variations. Liquid Level Relays are straightforward to install and safe to use.
Application Examples
Liquid Level Relays (Conductive Level Sensors) are used in a wide variety of applications including waste water management and the monitoring and management of corrosive liquid media, and designed specifically to provide for the:
Monitoring and control of liquid levels
Protection of pumps against dry running
Ability to detect liquid leaks in a system
Control of media mixing ratios
Control of liquid levels
Protection of pumps against dry running
Ability to detect liquid leaks in a system
Control of media mixing ratios
Control of liquid levels
Specifications
Attribute | Value |
---|---|
Number of Inputs | 1 |
Probe Voltage | 17V ac |
Supply Voltage | 230 V ac |
Overall Length | 92mm |
Overall Width | 40mm |
Overall Depth | 80mm |
Minimum Operating Temperature | -20°C |
Maximum Operating Temperature | +60°C |