Legris High Pressure Ball Valve Brass 1 in G 2 Way

  • RS Stock No. 282-6517
  • Mfr. Part No. 0432 23 34
  • Manufacturer Legris
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

In-Line Valves

Valve lockable in open or closed position
When plate fixed to valve body and plate attached to valve stem are padlocked together, valve handle cannot be operated

//media.rs-online.com/t_line/L282650-01.gif
//media.rs-online.com/t_line/L283016-01.gif

Ball Valve, Standard, Padlockable and Panel Mount

These nickel plated brass ball valves have seals designed to remove scale deposits with each operation. The polished brass ball is sealed on both sides by nylon ring seals that are supported by compensating nitrile ’O’ rings. This arrangement keeps the seal in contact with the ball, preventing leakage should seal wear occur. A single threaded insert forms part of the valve body, maintaining the required seal compression and allowing the valve to be disassembled easily for inspection.

Specifications
Attribute Value
Attachment Type Threaded
Threaded Connection 1 in G
Body Material Brass
Thread Size 1in
Safe for Use With Water
Maximum Working Pressure 40 bar
Connection Size mm 25mm
Connection Size inch 1in
Type 2 Way
13 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 191.41
(exc. GST)
$ 220.12
(inc. GST)
units
Per unit
1 - 5
$191.41
6 - 11
$186.61
12 +
$182.75
Related Products
The Filmaster® filling loop designed to allow sealed ...
Description:
The Filmaster® filling loop designed to allow sealed heating systems to be charged via a temporary mains supply connection. 1/8in. BSP test port on isolating double check valve15mm compression connections. Protects against Class 3 contamination risks. Ball valve with lever ...
These Float Valves are suitable for pressures up ...
Description:
These Float Valves are suitable for pressures up to 14 bar (206 psi). Use where a quieter fill is required. Can be used to replace a standard bottom entry ball valve. Fitting instructions included.
Ball valve type 546 PVC-U with solvent cement ...
Description:
Ball valve type 546 PVC-U with solvent cement sockets are part of a modular system which is both cost effective and eco-friendly. They can be applied in many areas including food and beverage, measurement and control, chemical process, water treatment ...
The M10S series from Spirax Sarco is a ...
Description:
The M10S series from Spirax Sarco is a 3-piece body ball valve that has been designed to be used as an isolating valve, not a control valve. It is suitable for use with many industrial fluids. Blow-out proof stems protect ...