ams OSRAM AS5047U-HTSM Series Magnetic Hall Effect Sensor, 1024 ppr ppr, Analogue Signal
- RS Stock No.:
- 200-9465
- Mfr. Part No.:
- AS5047U-HTSM
- Brand:
- ams OSRAM
This image is representative of the product range
Currently unavailable
We don't know if this item will be back in stock, RS intend to remove it from our range soon.
- RS Stock No.:
- 200-9465
- Mfr. Part No.:
- AS5047U-HTSM
- Brand:
- ams OSRAM
Specifications
Technical data sheets
Legislation and Compliance
Product Details
Find similar products by selecting one or more attributes.
Select all | Attribute | Value |
|---|---|---|
| Brand | ams OSRAM | |
| Encoder Technology | Magnetic | |
| Product Type | Hall Effect Sensor | |
| Pulses Per Revolution | 1024ppr | |
| Series | AS5047U-HTSM | |
| Maximum Revolutions | 4096rpm | |
| Output Signal Type | Analogue | |
| Interface Type | SPI, UVW, PWM | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Standards/Approvals | AEC-Q100-002, IPC/JEDEC J-STD-020, AEC-Q100-004 | |
| Maximum Operating Temperature | 150°C | |
| Switching Frequency | 3059Hz | |
| Select all | ||
|---|---|---|
Brand ams OSRAM | ||
Encoder Technology Magnetic | ||
Product Type Hall Effect Sensor | ||
Pulses Per Revolution 1024ppr | ||
Series AS5047U-HTSM | ||
Maximum Revolutions 4096rpm | ||
Output Signal Type Analogue | ||
Interface Type SPI, UVW, PWM | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Standards/Approvals AEC-Q100-002, IPC/JEDEC J-STD-020, AEC-Q100-004 | ||
Maximum Operating Temperature 150°C | ||
Switching Frequency 3059Hz | ||
- COO (Country of Origin):
- AT
The AS5047U is a high-resolution rotary position sensor for fast absolute angle measurement over a full 360-degree range. This new position sensor is equipped with a revolutionary integrated dynamic angle error compensation (DAEC™) with almost 0 latency at higher rotational speed. For increased signal quality at lower rotational speed, the dynamic filter system (DFS™) reduces transition noise. The robust design of the device suppresses the influence of any homogenous external stray magnetic field. A standard 4-wire SPI serial Interface with a CRC protection allows a host microcontroller to read 14-bit absolute angle position data from the AS5047U and to program non-volatile settings without a dedicated programmer. Incremental movements are indicated on a set of ABI signals with a maximum resolution of 16989 steps / 4096 pulses per revolution.
Related links
- ams OSRAM AS5047U-HTSM Series Magnetic Hall Effect Sensor Analogue Signal
- ams OSRAM AS5600L-ASOM Series Magnetic Position Sensor Analogue Signal
- ams OSRAM Hall Effect Sensor 14-Pin
- ams OSRAM Surface Mount Hall Effect Sensor 14-Pin
- Hall Effect Sensors
- ams OSRAM Surface Mount Hall Effect Sensor Analogue, 20-Pin
- ams OSRAM Hall Effect Sensor, SOIC8
- ams OSRAM Hall Effect Sensor, WLCSP
