STMicroelectronics X-NUCLEO-IHM07M1 Motor Configuration BLDC Expansion Board for L6230 for STM32 Nucleo

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

X-NUCLEO-IHM07M1 BLDC/PMSM Motor Driver Expansion Board

The X-NUCLEO-IHM07M1 is a three-phase Brushless DC motor (BLDC) driver expansion board based on the L6230 device. The L6230 driver is optimized for six-step and FOC algorithms thanks to independent current sensing.

• Operating voltage range: +8 to +48Vdc • Peak output current: 2.8A (1.4Arms)
• Operating frequency: Up to 100kHz
• Non-dissipative over-current detection and protection
• Cross-conduction protection
• Over-temperature protection
• Selectable 3-shunt or 1-shunt motor current sensing circuit
• Hall/Encoder motor sensor connector and circuit
• Potentiometer for manual speed setting
• User LED
• Screw terminals for motor signals and power supply
• ST morpho connectors for host MCU board
• Pads for Arduino Uno r3 Shield headers
• Compatible with STM32 Nucleo MCU boards
• Dimensions: 70 x 66mm
• Compatible with ST Six Step or ST FOC control algorithms

Motor Controllers & Drivers, STMicroelectronics

Attribute Value
Kit Name Motor Configuration
Kit Classification Expansion Board
For Use With STM32 Nucleo
Motor Type BLDC
Featured Device L6230
70 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 19.76
(exc. GST)
$ 22.72
(inc. GST)
Per unit
1 +
Related Products
The MCP1663 USB programmable power supply reference design ...
The MCP1663 USB programmable power supply reference design was developed to provide a versatile and easy to use solution for engineers. It easily transforms a typical computer’s USB port into a variable output power supply capable of supplying 2.5V to ...
The Click accessory modules plug into the MikroBUS ...
The Click accessory modules plug into the MikroBUS sockets in Mikro. Elektronika microcontroller development boards. RS232 click adds RS-232 serial connectivity to your design. Provides a standard RS-232 serial port via a DB9 connector. Connects to Tx & Rx pins ...
This short tutorial will guide you through the ...
This short tutorial will guide you through the assembly of your Pan-Tilt HAT. We'll go through attaching the pan-tilt module, connecting the servos to the board, mounting the camera, and the optional use of an Adafruit Neopixel stick for lighting.The ...
The H-Bridge Kit 2GO is a ready to use evaluation kit. It is fully populated with all electronic components equipped with the H-Bridge IFX9201 combined with XMC 1100 Micro controller based on ARM® Cortex®-M0 CPU. Realize your own DC motor ...