STMicroelectronics X-NUCLEO-IHM12A1 Motor Configuration DC Expansion Board for STSPIN240 for STM32 Nucleo

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

X-NUCLEO-IHM12A1 Dual DC Motor Driver Expansion Board

The X-NUCLEO-IHM12A1 is a dual low-voltage brushed DC motor driver expansion board based on the STSPIN240 quad half-bridge chip. The device is designed for battery-powered applications and can be forced into a zero-consumption state, yielding a significant increase in battery life.

• Operating voltage range: +1.8 to +10Vdc • Output current: 1.3Arms per motor
• Current control with adjustable off-time
• Standby consumption: <80nA
• Non-dissipative over-current detection and protection
• Over-temperature protection
• 4 x Output activity LEDs
• Fault LED
• Screw terminals for motor signals and power supply
• ST morpho connectors for host MCU board
• Arduino Uno r3 compatible Shield headers
• Compatible with STM32 Nucleo MCU boards

Motor Controllers & Drivers, STMicroelectronics

Specifications
Attribute Value
Kit Name Motor Configuration
Kit Classification Expansion Board
For Use With STM32 Nucleo
Motor Type DC
Featured Device STSPIN240
5 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 16.97
(exc. GST)
$ 19.52
(inc. GST)
units
Per unit
1 +
$16.97
Related Products
Description:
The Haptic click is an add-on board that driver ERM (Eccentric Rotating Mass) and LRA (Linear Resonant Actuator) vibration motors. A Motor Haptic Driver (Texas Instruments DRV2605L) includes a haptic-effect library with over 100 haptic effects. Audio interface (3.5 mm ...
The STEVAL-IPM08B compact motor drive power board is ...
Description:
The STEVAL-IPM08B compact motor drive power board is based on SLLIMM™ (small low-loss intelligent molded module) 2nd series module ( STGIB8CH60TS-L). It provides an affordable and easy-to-use solution for driving high power motors in a wide range of applications such ...
Description:
The H-Bridge Kit 2GO is a ready to use evaluation kit. It is fully populated with all electronic components equipped with the H-Bridge IFX9201 combined with XMC 1100 Micro controller based on ARM® Cortex®-M0 CPU. Realize your own DC motor ...
The LV8402GP is a 2ch forward/reverse motor driver ...
Description:
The LV8402GP is a 2ch forward/reverse motor driver IC using D-MOS FET for its output stage. As MOS circuit is used, it supports the PWM input. It also provides protection functions such as heat protection circuit and reduced voltage detection ...