Power Integrations BRD1165C-TL, AC Induction, BLDC Motor, PMSM Motor Motor Driver IC 24-Pin, InSOP-C
- RS Stock No.:
- 187-5401
- Mfr. Part No.:
- BRD1165C-TL
- Brand:
- Power Integrations
4000 In stock for delivery within 7 working day(s)
Added
Price (ex. GST) Each (On a Reel of 2000)
$2.231
(exc. GST)
$2.566
(inc. GST)
Units | Per unit | Per Reel* |
2000 - 2000 | $2.231 | $4,462.00 |
4000 - 6000 | $2.175 | $4,350.00 |
8000 + | $2.142 | $4,284.00 |
*price indicative |
- RS Stock No.:
- 187-5401
- Mfr. Part No.:
- BRD1165C-TL
- Brand:
- Power Integrations
Technical data sheets
Legislation and Compliance
Product Details
Highest Performance and Design Flexibility
Fully integrated half-bridge stage with up to 98% efficiency
Eliminates external heat sink at rated continuous RMS current
600 V N-channel power FREDFETs
Ultra-soft, fast recovery diode
Accurate instantaneous phase current information output (BRD126X)
Eliminates external sensing and amplification circuitry
Self-biased low-side and high-side drivers
Eliminates need for auxiliary power supply
Small footprint surface mount inSOP-24C package
Exposed pads enable heat sinking through PCB
Controlled FREDFET switching speed reduces EMI
Adjustable cycle-by-cycle current limit for both FREDFETs
Fail-safe operation
Internal dual level thermal overload protection
Self-configuring system level monitoring input
Four level DC bus undervoltage
DC bus overvoltage
System temperature
Adaptive dead time
Simultaneous conduction lockout protection
Applications
2- or 3-phase high-voltage PM and BLDC motor drives
Up to 300 W typical inverter output power
Appliances including dish washers and refrigerators
Condenser fans in high efficiency air conditioners
Fully integrated half-bridge stage with up to 98% efficiency
Eliminates external heat sink at rated continuous RMS current
600 V N-channel power FREDFETs
Ultra-soft, fast recovery diode
Accurate instantaneous phase current information output (BRD126X)
Eliminates external sensing and amplification circuitry
Self-biased low-side and high-side drivers
Eliminates need for auxiliary power supply
Small footprint surface mount inSOP-24C package
Exposed pads enable heat sinking through PCB
Controlled FREDFET switching speed reduces EMI
Adjustable cycle-by-cycle current limit for both FREDFETs
Fail-safe operation
Internal dual level thermal overload protection
Self-configuring system level monitoring input
Four level DC bus undervoltage
DC bus overvoltage
System temperature
Adaptive dead time
Simultaneous conduction lockout protection
Applications
2- or 3-phase high-voltage PM and BLDC motor drives
Up to 300 W typical inverter output power
Appliances including dish washers and refrigerators
Condenser fans in high efficiency air conditioners
For products that are Customized and under Non-cancellable & Non-returnable, Sales & Conditions apply.
Specifications
Attribute | Value |
---|---|
Motor Type | AC Induction, BLDC Motor, PMSM Motor |
Configuration | H Bridge |
Output Configuration | Half Bridge |
Maximum Output Current | 3A |
Mounting Type | Surface Mount |
Package Type | InSOP-C |
Pin Count | 24 |
Typical Switching Frequency | 20kHz |
Series | BRD |
Dimensions | 9.4 x 10.8 x 1.45mm |
Minimum Operating Temperature | -40 °C |
Product Height | 1.45mm |
Height | 1.45mm |
Width | 10.8mm |
Product Width | 10.8mm |
Maximum Operating Temperature | +150 °C |
Product Length | 9.4mm |
Length | 9.4mm |