Name: Megger MFT1835 Multifunction Tester, 1000V , Earth Resistance Measurement With Europe Mains
Brand: Megger
SKU: 901-1333
Price: 5170.61 NZD
Availability: Discontinued

Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Megger
	Loop Impedance Test Type	2 Wire, 3 Wire
	Automatic RCD Test	Yes
	RCD Ramp Test	Yes
	Model Number p	MFT1835
	Non-Tripping	Yes
	Insulation Test Voltage	1000V
	Maximum Voltage Measurement	600V
	Test Type	Continuity, RCD
	Earth Resistance Measurement	Yes
	Downloadable Data	Yes
	Interface Type	Europe Mains
	Continuity Test Current	205 mA @ 0 → 2 Ω
	RCD Test Type	AC, B
	IP Rating	IP54
	Test Standards	IEC 60364
	Width	150mm
	Display Type	Backlight
	Weight	1 (with Battery)kg
	Dimensions	235 x 150 x 85mm
	Height	85mm
	Minimum Continuity Resistance	0.01Ω
	Maximum Operating Temperature	+55°C
	Power Source	Battery
	Safety Category Voltage	300 V, 600 V
	Minimum Operating Temperature	-10°C
	Maximum Continuity Resistance	99.9kΩ
	Plug Type	Australia, New Zealand
	Safety Category	CAT III 600 V, CAT V 300 V
	Length	235mm
	Battery Type	AC, Rechargeable
	Safety Category Level	CAT III, CAT V

	Select all
	Brand Megger
	Loop Impedance Test Type 2 Wire, 3 Wire
	Automatic RCD Test Yes
	RCD Ramp Test Yes
	Model Number p MFT1835
	Non-Tripping Yes
	Insulation Test Voltage 1000V
	Maximum Voltage Measurement 600V
	Test Type Continuity, RCD
	Earth Resistance Measurement Yes
	Downloadable Data Yes
	Interface Type Europe Mains
	Continuity Test Current 205 mA @ 0 → 2 Ω
	RCD Test Type AC, B
	IP Rating IP54
	Test Standards IEC 60364
	Width 150mm
	Display Type Backlight
	Weight 1 (with Battery)kg
	Dimensions 235 x 150 x 85mm
	Height 85mm
	Minimum Continuity Resistance 0.01Ω
	Maximum Operating Temperature +55°C
	Power Source Battery
	Safety Category Voltage 300 V, 600 V
	Minimum Operating Temperature -10°C
	Maximum Continuity Resistance 99.9kΩ
	Plug Type Australia, New Zealand
	Safety Category CAT III 600 V, CAT V 300 V
	Length 235mm
	Battery Type AC, Rechargeable
	Safety Category Level CAT III, CAT V

MFT1800 Multifunction Tester

RoHS Status: Not Applicable

COO (Country of Origin):: GB

Megger Multifunction Tester

The Megger electrical tester is an MFT1800 series multifunction installation tester designed for testing low voltage of 100V, 250V,500V, 1000V with Europe mains plug. This advanced model provides the added benefit of type B RCD testing, 3-pole earth electrode testing with attached rod technique and stakeless testing to a downloading and rechargeable instrument. To reduce the cost of ownership, it has rechargeable batteries and has charge time is less than 4 hours

Features and Benefits

3-terminal earth test and stakeless testing for spike resistance measurement
Full input protection and safety warnings when a hazardous voltage is present
Internal memory and Bluetooth communication
Simple colour-coded test selection and large clear backlit display for ease of use
Two and three wire non-trip loop testing for RCD protected circuits

Applications

Commercial sites
Industrial sites
Residential sites

Certifications

EN61010 CATIV
IEC 61010 CAT IV 300 V
IEC60364
IP54 rated