Infineon Photocoupler, Max. Input 25 mA, 8.63mm Length, Through Hole Mounting Style

  • RS Stock No. 165-5775
  • Mfr. Part No. PVT312LPBF
  • Manufacturer Infineon
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): PH
Product Details

Transistor Output - FET & MOSFET, Infineon

The PDV13 series from Infineon is a single pole, normally open, solid-state replacement for electromechanical relays used for general purpose switching of analogue signals. It utilises Infineon HEXFET power MOSFET as the output switch, driven by an integrated circuit photovoltaic generator of novel construction.

Bounce-Free Operation
1010 Off-State Resistance
1,000 V/μsec dv/dt
5 mA Input Sensitivity
4,000 VRMS I/O Isolation
Solid-State Reliability

Optocouplers, International Rectifier

Specifications
Attribute Value
Maximum Input Current 25 mA
Isolation Voltage 4kVrms
Rise Time 3ms
Pin Count 6
Mounting Style Through Hole
Minimum Operating Temperature -40°C
Maximum Operating Temperature +85°C
Length 8.63mm
Width 6.47mm
Depth 3.42mm
Operating Temperature Range -40 → +85 °C
Dimensions 8.63 x 6.47 x 3.42 mm
150 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Tube of 50)
$ 3.828
(exc. GST)
$ 4.402
(inc. GST)
units
Per unit
Per Tube*
50 +
$3.828
$191.40
*price indicative
Related Products
The VOMA617A series has a Ga. AlAs infrared ...
Description:
The VOMA617A series has a Ga. AlAs infrared emitting diode, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a 4-pin mini-flat package. It features a high current transfer ratio at low input current, low ...
EMG-OV power opto couplers are used as the ...
Description:
EMG-OV power opto couplers are used as the modular interface in all industrial fields for signal amplification to 230V / 3A and for electrical isolation.Input and output end suppressors, integrated operating display and a 3.5 kV test voltage ensure maximum ...
Converts a 0-10Vdc input signal into a pulse ...
Description:
Converts a 0-10Vdc input signal into a pulse width modulated output to control the output using variable on-off ratios. This could be used, for example, in closed loop temperature controllers.
Interface relays and optocouplers are useful to link ...
Description:
Interface relays and optocouplers are useful to link sensors and actuators in the process, which are connected to the PLC via conventional wires.The interface modules providing both voltage-current level adaptation and isolation. Build in RC-circuits to increase the contact-life. Screw ...