Pico Technology Oscilloscope Probe, Probe Type: Active, Differential 50MHz 600V

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): TW
Product Details

Pico Technology Oscilloscope Probe

The Pico Technology TA058 oscilloscope probe is an active differential probe, suitable for high common-mode voltage measurement applications up to ±700V. It can be used with a signal speed of up to 50MHz. This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high voltage differential measurements.

Features and Benefits

Bandwidth is DC to 50MHz (–3dB)
Attenuation ratio is 10:1
Accuracy is ±1%
Input impedance is 1.6Mohm ll7pF each side to ground
Differential range is ±70V (DC + peak AC) or 70VRMS
Maximum differential is ±700 V (DC + peak AC) or 600VRMS
Common mode range is ±700V (DC + peak AC) or 600VRMS
Absolute maximum voltage is ±700V (DC + peak AC) or 600VRMS CAT I
Swing is ±7V into 5Kohm load
Offset (typical) is <±2mV
Noise (typical) is 0.7mVRMS
Source impedance is 50ohm
CMRR (typical) is 95dB at 60Hz and 60dB at 1MHz
Ambient operating temperature ranges between -10°C and 40°C
Power requirement 4xAA cells or 6VDC/60mA mains adaptor or regulated 9VDC/40mA mains adaptor

Applications

Safe measurement in power circuit
Acquisition of low speed balanced differential signals found in serial communications buses
Transients in switching power supplies, inverters and motor drives, electronic ballasts and CRT displays
Signals in the milliV range from sensors and other instrumentation

Certifications

IEC-1010.1
IEC-1010.2-031 CAT III
Pollution Degree 2

Specifications
Attribute Value
Probe Type Active, Differential
Attenuation 1:10
Bandwidth 50MHz
Maximum Common Mode Input Voltage 600V
Number of Probes 2
Safety Category Level CAT I
Safety Category Voltage ±700 V, 600 Vrms
Safety Category CAT I ±700 V, 600 Vrms
4 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 818.55
(exc. GST)
$ 941.33
(inc. GST)
units
Per unit
1 +
$818.55
Related Products
An indispensable accessory for analogue or digital oscilloscopes ...
Description:
An indispensable accessory for analogue or digital oscilloscopes to visualise signals that are not referenced to the ground!A range of three models to fulfil different requirements.1 or 2 input channels.Coaxial or banana measuring leads/long length banana leads.A model with coaxial ...
Rated voltage of probe:. Highly flexible 1.2m coaxial ...
Description:
Rated voltage of probe:. Highly flexible 1.2m coaxial cable with BNC plug. Compensation adjusting screwø 2 mm safety socket for reference connection. Isoprobe® II 10:1 450MHz probe. Push-on hook clip with additional reference lead (600 V, CAT II)Push-on BNC plug ...
The Tektronix differential active oscilloscope probe offers truer ...
Description:
The Tektronix differential active oscilloscope probe offers truer signal reproduction and fidelity for high-frequency measurements. With ultra-low input capacitance and the versatile device under test connection capabilities, it has excellent high-speed electrical and mechanical performance required for ...
Compact design with a 2.5mm probe tip diameter ...
Description:
Compact design with a 2.5mm probe tip diameter provides better visibility to the circuit under test than conventional 5mm or 3.5mm probe tips. This makes it easier to probe today’s fine pitched space ICs and components. The replaceable probe tip ...