Domnick Hunter OIL-X Evolution 0.01μm 30L/s G 1/2 Pneumatic Filter, 1 → 16bar

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Oil-X Evolution Series Filters - General Purpose Grade AO & High Efficiency Grade AA

Meets and exceeds requirements for compressed air quality
Improved air flow management for low energy consumption.
Oil vapour removal
Drainage ribs and no wet band formation
Improved element replacement
Fully corrosion protected
Incident monitor (available separately) to indicate premature high differential pressure. It can be retrofitted to existing housings without depressurising the system.
Fixing clamps (available separately) allow the joining of two filters and act as wall mounting brackets

Technical Specification - Filter units
Max. Operating Pressure 16 bar (232 psi)
Max. Operating Temperature 80°C (176°F)
Min. Operating Temperature 1.5°C (35°F)
Technical Specification - Element Grade AO
High efficiency general purpose protection, particle removal down to 1 micron, including water and oil aerosols. Maximum remaining oil aerosol content: 0.6mg/m3 at 21°C (0.5 ppm(w) at 70°F)
Technical Specification - AA Grade Elements
For high efficiency oil removal/filtration prcede with AO grade filter
Particle removal down to 0.01 microns, including water and oil aerosols
Maximum remaining oil aerosol content: 0.01mg/m3 or 0.01 ppm(w) at 21°C

Standards

ISO 8573.1

Supplied with

AO or AA grade Filter as appropriate

Key Characteristics
QUALITY DIRT WATER OIL
CLASS Particle size Pressure Dewpoint °C (Including vapour)
  in μm (ppm. vol) at 7 bar g (100 psi g) mg/m3
1 0.1 -70 (0.3) 0.01
2 1 -40 (16) 0.1
3 5 -20 (128) 1.0
4 15 +3 (940) 5
5 40 +7 (1240) 25
6 - +10 (1500) -
Specifications
Attribute Value
Manufacturer Series OIL-X Evolution
Filtration Size 0.01µm
Port Connection G 1/2
Maximum Flow Rate 30L/s
Minimum Operating Pressure 1bar
Maximum Operating Pressure 16 bar
Maximum Operating Temperature +80°C
Port Connection Thread Standard G
Minimum Operating Temperature +2°C
Port Connection Thread Size 1/2 in
3 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 647.34
(exc. GST)
$ 744.44
(inc. GST)
units
Per unit
1 +
$647.34
Related Products
Harmoinc distortion is more prevalent today with the ...
Description:
Harmoinc distortion is more prevalent today with the rise in use of electronic equipment. All electronic equipment that converts AC to DC will distort the mains supply to some degree. Passive power factor correction can correct up to 0.8 depending ...
Bosch Rexroths 50LEN filters are designed to work ...
Description:
Bosch Rexroths 50LEN filters are designed to work up to a pressure of 50 bar and can be used to remove contamination from a number of positions around the hydraulic circuit. In-line hydraulic filters can be placed to prevent dirt ...
Mainline filters for the efficient removal of large ...
Description:
Mainline filters for the efficient removal of large particles of oil and foreign matter from compressed air. SMC's AFF range of seperators can be used with same spacers as SMC's AC series for modular connection removing the need for piping, ...
High flow capacity filters, lubricators and separators with ...
Description:
High flow capacity filters, lubricators and separators with polycarbonate bowls. All have an ambient and media temperature range of 5 - 60°C and a proof pressure of 15 bar. 5μm filterMaximum operating pressure of 9.9 barAuto-drain types require 100l/min flow ...