IMI Norgren PNEUFIT Series Elbow Threaded Adaptor, R 1/4 Male to Push In 6 mm, Threaded-to-Tube Connection Style
- RS Stock No.:
- 210-2388
- Mfr. Part No.:
- 101470628
- Brand:
- IMI Norgren
5 In stock for delivery within 1 working day(s)
Added
Price (ex. GST) Each (In a Pack of 5)
$15.346
(exc. GST)
$17.648
(inc. GST)
Units | Per unit | Per Pack* |
5 - 25 | $15.346 | $76.73 |
30 - 55 | $15.20 | $76.00 |
60 + | $14.968 | $74.84 |
*price indicative |
- RS Stock No.:
- 210-2388
- Mfr. Part No.:
- 101470628
- Brand:
- IMI Norgren
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
- COO (Country of Origin):
- GB
Product Details
IMI Norgren Threaded-To-Tube Elbow Adaptor, R1/4 Male To Push-In 6mm, Swivel Connection - PNEUFIT Series - 101470628
For straightforward assembly of a pneumatic circuit, choose this elbow adaptor from IMI Norgren. Its swivel function adds flexibility to your set-up as it can rotate in any direction. A non-PTFE (polytetrafluoroethylene) coating on the adaptor's threaded connector end ensures smooth insertion and eliminates the risk of any distortion under pressure. The other end's push-in connector allows for simple, tool-free assembly. Thanks to its wide operating pressure range of -0.9 to 18 bar, this device is suitable for use in both low-pressure and high-pressure systems.
Features & Benefits
• Nickel-plated brass body for durability and resistance corrosion
• Silicone-free O-rings for reduced risk of environmental contamination
• Right-angle orientation to fit into tight or awkward spaces
• Wide operating temperature range of -20°C to +80°C for use in demanding environments
• Silicone-free O-rings for reduced risk of environmental contamination
• Right-angle orientation to fit into tight or awkward spaces
• Wide operating temperature range of -20°C to +80°C for use in demanding environments
Applications
• Conveyor and assembly lines
• Air tools
• Controls and actuators
• Air tools
• Controls and actuators
How do I assemble and disassemble this adaptor?
When connecting this adaptor, you should first ensure that your tubing is burr-free. Then simply push the hose into the fitting until it bottoms on the tube-stop. To disconnect, push the tube into the fitting, hold down the collet and withdraw the hose.
Specifications
Attribute | Value |
---|---|
Connector A | R 1/4 Male |
Connector B | Push In 6 mm |
Pneumatic Fitting Type | Elbow Threaded Adaptor |
Connection Style | Threaded-to-Tube |
Threaded Connection | R 1/4 Male |
Manufacturer Series | PNEUFIT 10 |
Thread Material | Nickel Plated Brass |
Minimum Operating Temperature | -20°C |
Maximum Operating Temperature | +80°C |
Body Material | Nickel Plated Brass |
Angle | 90° |
Swivel Connection | Yes |
Maximum Operating Pressure | 18 bar |