The EVAL-L9960 and EVAL-L9960T are the simplest solution to evaluate respectively the L9960 and L9960T functionalities providing all the inputs and outputs capabilities necessary to drive DC motors and monitor diagnostic functions.
The driving strategy is enhanced by configurable PWM / DIR pins as IN1/IN2.The H-Bridge contains integrated free-wheel diodes. In case of free wheeling condition, the low side or the high side transistor is switched on in parallel of its diode to reduce power dissipation.

Wide supply voltage range (VBatt): 4V÷28V
Current limitation threshold set by SPI:
4 levels from 2.5A to 8.6A (Typ.)
Device controlled and programmed via SPI
Diagnostic functions accessible via SPI:
short circuit to battery,
short circuit to ground,
short circuit overload,
over temperature,
open load
On board 5V, 1.5A Voltage regulator
2 LEDs for monitoring VBatt and EN signal.
Input signal connector compatible with the SPC5 Discovery+ boards.
Possibility to connect the board to microcontroller boards by a simple adaptor or by wires.
Test points to monitoring both input signals (SPI, PWM, EN) and outputs
Flexible driving strategy via configurable pins PWM/DIR (IN1/IN2):
No heat-sink is required

Units	Per unit
1 - 4	$215.67
5 +	$208.54

Select all	Attribute	Value
	Brand	STMicroelectronics
	Power Management Function	Half-Bridge Driver
	For Use With	SPC560P-DISP
	Kit Classification	Development Board
	Featured Device	EVAL-L9960
	Kit Name	Evaluation Boards

	Select all
	Brand STMicroelectronics
	Power Management Function Half-Bridge Driver
	For Use With SPC560P-DISP
	Kit Classification Development Board
	Featured Device EVAL-L9960
	Kit Name Evaluation Boards

STMicroelectronics Evaluation Boards Half-Bridge Driver for EVAL-L9960 for SPC560P-DISP

FREE delivery for orders over $60.00 ex GST

For these non-cancellable (NC), and non-returnable (NR) products, Terms and Conditions apply.

Related links