RS PRO Pressure Reducing Valve, 1/2 in Screwed Iron Female

  • RS Stock No. 761-345
  • Manufacturer RS PRO
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): IT
Product Details

Pressure Reducing Valve - BSP Female

To avoid noise in long runs of pipework and equipment it is desirable to maintain the flow rate less than two litres per second
Suitable for use with water or compressed air
Can be installed in any position and serviced in situ
Single piece acetal resin cartridge
Preset pressure
40°C maximum operating temperature

Note

To facilitate maintenance it is recommended that isolation valves are fitted before and after the pressure reducing valve.
No Gauge port

//media.rs-online.com/t_line/L761345-01.gif
//media.rs-online.com/t_line/L761351-01.gif
//media.rs-online.com/t_line/LI761351-01.gif
Specifications
Attribute Value
Connection 1/2 in Screwed Iron Female
Minimum Outlet Pressure 1bar
Maximum Outlet Pressure 6bar
Body Material Chrome Plated Brass
Maximum Flow Rate 2L/s
Connection Gender Female
Connection Size 1/2in
Thread Standard or Connection Type Screwed Iron
Outlet Pressure Range 1 → 6bar
1 : Next working day
46 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 73.57
(exc. GST)
$ 84.61
(inc. GST)
units
Per unit
1 +
$73.57
Related Products
Application : Industry, pneumatics, hydraulic, plumbing installationsOperating Temperature ...
Description:
Application : Industry, pneumatics, hydraulic, plumbing installationsOperating Temperature : -20゚C / +100゚C Operating pressure : see non-shock cold working pressure chart on data sheetThreads : ISO 228 parallel female by female threads Stem : NylonNBR 65 SH/PS seal on nylon ...
For heating, sanitary and compressed air systems, pumps ...
Description:
For heating, sanitary and compressed air systems, pumps and autoclavesBody in hot forged DZR brassThreading to BS2779Hostaform inner valveSpring in 18//8 AISI 302-304 stainless steelHydrostatic test pressures 30 bar/435psi (shell), 22 bar/315psi (seat)Compact design, allows flow in one direction only, ...
These Float Valves are suitable for pressures up ...
Description:
These Float Valves are suitable for pressures up to 14 bar (206 psi). WRC approvedRubber diaphragmDischarge above overflow level prevents back siphonage - meets requirements of Byelaw 42No hiss or prolonged shut-off noiseThumbscrew on lever provides vertical and horizontal adjustment ...
WRAS approved hydraulic water management devices that comply ...
Description:
WRAS approved hydraulic water management devices that comply with Bylaw 82 and 83Standard (STD), low pressure (LP) and high sensitivity low pressure (HSLP) typesReplace trickle - cock in the supply pipe to the cisternWork by detecting slight changes in water ...