Cistermiser Low Pressure Cistern Control Valve, 1/2 in BSP Female

  • RS Stock No. 242-8365
  • Mfr. Part No. 6074A
  • Manufacturer Cistermiser
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

Valves - Hydraulic

WRAS approved hydraulic water management devices that comply with Bylaw 82 and 83
Standard (STD), low pressure (LP) and high sensitivity low pressure (HSLP) types
Replace trickle - cock in the supply pipe to the cistern
Work by detecting slight changes in water pressure caused when washroom facilities are used
Pass a pre-set amount of water per operation
Stop filling the cistern when the building is empty

Approvals

WRC

Specifications
Attribute Value
Connection 1/2 in BSP Female
Connection Gender Female
Connection Size 1/2in
Thread Standard or Connection Type BSP
3 In stock for delivery within 7 working day(s)
Price (ex. GST) Each
$ 500.13
(exc. GST)
$ 575.15
(inc. GST)
units
Per unit
1 +
$500.13
Related Products
RS screwed end ball valves for the control ...
Description:
RS screwed end ball valves for the control of flow. Available in a variety of sizes. Investment casting. Blow-out proof stem. Locking deviceISO 5211 Mounting padTA-Luft approved (option)Length conform to DIN 3202/4-M3-2013SM3 (option)Thread type: ASME B1.20.1 (NPT) DIN2999 and BS21 ...
RS Stainless Steel Screwed End Ball Valves for ...
Description:
RS Stainless Steel Screwed End Ball Valves for the control of flow. Full port 1/4" - 3" (DN8 - DN80)W.P: 1000 WOG (PN63)W.T: -20°C to 200°CInvestment casting. Blow-out proof stem. Locking device. Tapped and drilled mounting pad (option)TA-Luft approved (option)Length ...
RS High Pressure Ball Valves for the control ...
Description:
RS High Pressure Ball Valves for the control of flow. 1/4in. - 2in. (DN8∼DN50)W.P.: 3600 WOG (PN250)W.T.: -20゚C ∼ 260゚CInvestment casting. Blow-out proof stem. Anti-static device (option)Locking deviceISO 5211 Mounting pad. Seal welded ends.
To avoid noise in long runs of pipework ...
Description:
To avoid noise in long runs of pipework and equipment it is desirable to maintain the flow rate less than two litres per second. Suitable for use with water or compressed air. Can be installed in any position and serviced ...