Asco Pressure Reducing Valve, 1/2 in G

  • RS Stock No. 303-3558
  • Mfr. Part No. E290A384
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Pressure-operated solenoid valves

E290 series range of solenoid valves, 2 // 2 N/C piston-type operators for all neutral (bronze) or corrosive (stainless steel) fluids.
Fluid entry under valve disc.
High flow rate.
Designed to eliminate water hammer.
High-performance stuffing box.

Two-way Valves and Control Modules

Valves and control modules designed specifically to operate together, provide a valve opening which is proportional to the input signal and allows this to be correlated to the respective operating conditions.

Two-way Proportional Flow Valves & Control Modules

Specifications
Attribute Value
Connection 1/2 in G
Minimum Outlet Pressure 0bar
Maximum Outlet Pressure 16bar
Body Material Bronze
Maximum Flow Rate 82L/min
Connection Gender Female
Connection Size 1/2in
Thread Standard or Connection Type G
Outlet Pressure Range 0 16bar
5 Within 5 working day(s) (Global stock)
8 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 294.24
(exc. GST)
$ 338.38
(inc. GST)
units
Per unit
1 +
$294.24
Related Products
316L stainless steel construction, fully machined from quality ...
Description:
316L stainless steel construction, fully machined from quality forgingsEPDM seals. Creep resistant bearings. Reinforced nylon handle. Reduced risk of contamination by top and bottom seals. Operating temperature -10ºC to +120°CWorking pressure 0.9 bar to 10 bar. Polished disc.
RS screwed end ball valves for the control ...
Description:
RS screwed end ball valves for the control of flow. Available in a variety of sizes. Investment casting. Blow-out proof stem. Locking deviceISO 5211 Mounting padTA-Luft approved (option)Length conform to DIN 3202/4-M3-2013SM3 (option)Thread type: ASME B1.20.1 (NPT) DIN2999 and BS21 ...
RS Brand Stainless Steel Screwed End Ball Valves ...
Description:
RS Brand Stainless Steel Screwed End Ball Valves for the control of flow. Full port 1/4" to 4" (DN8 to DN100)W.P: 1000 WOG (PN63)W.T: -20°C to 200°CInvestment casting. Blow-out proof stem. Locking deviceISO 5211 Mounting pad. Thread type: ASME B1.20.1 ...
To avoid noise in long runs of pipework ...
Description:
To avoid noise in long runs of pipework and equipment it is desirable to maintain the flow rate less than two litres per second. Suitable for use with water or compressed air. Can be installed in any position and serviced ...