Asco Pressure Reducing Valve, 3/4 in G

  • RS Stock No. 303-3564
  • Mfr. Part No. E290A385
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

Pressure-operated solenoid valves

E290 series range of solenoid valves, 2 // 2 N/C piston-type operators for all neutral (bronze) or corrosive (stainless steel) fluids.
Fluid entry under valve disc.
High flow rate.
Designed to eliminate water hammer.
High-performance stuffing box.

Two-way Valves and Control Modules

Valves and control modules designed specifically to operate together, provide a valve opening which is proportional to the input signal and allows this to be correlated to the respective operating conditions.

Two-way Proportional Flow Valves & Control Modules

Specifications
Attribute Value
Connection 3/4 in G
Minimum Outlet Pressure 0bar
Maximum Outlet Pressure 10bar
Body Material Bronze
Maximum Flow Rate 157L/min
Connection Gender Female
Connection Size 3/4in
Thread Standard or Connection Type G
Outlet Pressure Range 0 → 10bar
4 Within 5 working day(s) (Global stock)
8 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 340.02
(exc. GST)
$ 391.02
(inc. GST)
units
Per unit
1 +
$340.02
Related Products
316L stainless steel construction, fully machined from quality ...
Description:
316L stainless steel construction, fully machined from quality forgingsEPDM seals. Creep resistant bearings. Reinforced nylon handle. Reduced risk of contamination by top and bottom seals. Operating temperature -10ºC to +120°CWorking pressure 0.9 bar to 10 bar. Polished disc.
Single check valve protects against the risk of ...
Description:
Single check valve protects against the risk of back flow and back syphonage contaminations. Compact lightweight construction for easy installation. Minimum pressure drop giving good flow rates. Ideal for all Class 2 contamination risks as per Water Supply (water fittings) ...
To avoid noise in long runs of pipework ...
Description:
To avoid noise in long runs of pipework and equipment it is desirable to maintain the flow rate less than two litres per second. Suitable for use with water or compressed air. Can be installed in any position and serviced ...
Applications: Steam. Min. Set pressure 0.2 barg. Overpressure ...
Description:
Applications: Steam. Min. Set pressure 0.2 barg. Overpressure 10%Blowdown Gases 10%, liquids 20%Connections: Threaded BSP / NPTDischarge coefficients k= 0.55 for gases, k= 0.48 for liquids. Design EN-12516-1, EN-4126-1/7DIN 259 and ANSI B2.1Rating PN-40Material Stainless steel 316LMaterials ENTemperature range -10 ...