Reliance 4.5bar Temperature and Pressure Relief Valve with Male BSP 1/2 in BSP Male Connection

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): US
Product Details

Full Cartridge Pressure and Temperature Relief Valve

All Reliance pressure vessels are supplied with a replaceable membrane, which separates the water and air, to prevent contamination of the water system, corrosion of the pressure vessel or pressure loss in the water system.

Typically pressure vessels are used in pumped systems. When the pump starts, the pressure inside the vessel begins to increase. Once the vessel is full and the pump has reached its high pressure setting it will switch off. When water is then drawn off from the system the air pressure surrounding the membrane will force the water out of the pressure vessel and into the system. Once the membrane is fully deflated and the system has reached its minimum pressure, the pump will start on its low pressure setting and will begin the cycle again.

The purpose of this system is to prevent constant cycling of the pump and continuous running when the system is being used

Protect against temperature rising above 95゚C
Prevent over pressurisation
Twist toop cartridge design for easy servicing
Range of different pressure settings and different probe lenghts

Note

(7948432 no PTFE), (7948439, 7948448 and 7948457 with probe)

Approvals

WRAS

Specifications
Attribute Value
Connection 1/2 in BSP Male
Maximum Set Pressure 4.5bar
Maximum Temperature +95°C
For Use With Hot Water
Connection Gender Male
Thread Size 1/4in
Thread Standard or Connection Type BSP
2 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 74.88
(exc. GST)
$ 86.11
(inc. GST)
units
Per unit
1 - 4
$74.88
5 - 9
$72.00
10 +
$70.20
Related Products
These Float Valves are suitable for pressures up ...
Description:
These Float Valves are suitable for pressures up to 14 bar (206 psi). WRC approved. Rubber diaphragm. Discharge above overflow level prevents back siphonage - meets requirements of Byelaw 42No hiss or prolonged shut-off noise. Thumbscrew on lever provides vertical ...
These Float Valves are suitable for pressures up ...
Description:
These Float Valves are suitable for pressures up to 14 bar (206 psi). WRAS approved. Small and quiet in operation. Minimum working pressure 0.15 bar. Fits most tanks and cisterns. Manufactured from 4-ton tensile strength engineering resin to high tolerances. ...
Hot forged brass gate valve and DZR brass ...
Description:
Hot forged brass gate valve and DZR brass gate valve with forged brass screwed bonnet, non rising stem and solid wedge disc. Manufactured to BS5154/B - PN 20BS1 kitemark approved: License no. KM-06254.
Female screwed type bronze globe valves. These inline ...
Description:
Female screwed type bronze globe valves. These inline stop valves can be used in many applications including steam, water, oil and air. • Rising stem• PTFE renewable disk• High-quality PTFE packing• Body design conditions: PN32• 198°C at 14 bar, 100°C ...