The SLWSTK6061A Wireless Starter Kit (WSTK) is an excellent starting point to get familiar with the EFR32 Flex Gecko Wireless System-on-Chip (SoC). The WSTK BRD4001A mainboard features an on-board J-Link debugger, an Advanced Energy Monitor (AEM) for real-time current and voltage monitoring, and a Virtual COM port interface (VCOM). Packet Trace Interface (PTI) is supported. The mainboard (BRD4001A) is paired with the EFR32FG 2400/868 MHz SLWRB4250B radio board (RS 122-9767) plugged directly into the mainboard. The radio board can also be used as a reference design for matching networks of the RF interfaces. All debug functionality, including AEM, VCOM and PTI, can also be used towards an external device instead of the included radio board.
Features
Ethernet and USB connectivity SEGGER J-Link on-board debugger AEM, VCOM and PTI support Si7021 humidity and temperature sensor Ultra-low power 128 x 128 pixel memory, buttons and LEDs 20-pin 2.54 mm header for expansion boards Battery or USB powered
Features (radio board)
EFR32 Flex Gecko Wireless SoC with 256 kB Flash and 32 kB RAM (EFR32FG1P133F256GM48) Inverted-F PCB antenna (2.4 GHz band) SMA connector (868 MHz band)
Note
The following items are included in the box: • 2x BRD4001A Wireless Starter Kit Mainboards • 2x BRD4250B EFR32FG 2400/868 MHz 13 dBm Radio Boards • 2x 868 MHz antennas with SMA connector • 2x CR2032 Lithium batteries • 2x AA battery holders • 2x USB Type A to USB Mini-B cables • 1x BRD8010A WSTK Debug Adapter
