The Atmel ZigBit™ extension board ATZB-A-233-XPRO supports the AT86RF233 Amplified wireless transceiver module. It is used to evaluate the module and can operate plugged into an Xplained Pro board or wired into a developer's prototype system. The ZigBit module is compatible with a ZigBee stack that supports a self-healing, self-organizing mesh network, while optimizing network traffic and minimizing power consumption.
ZigBit 2.4GHz AT86RF233 Amplified Module Xplained Pro 20-pin connector Headers for ZigBit pins not routed to Xplained Pro connector Header for monitoring ZigBit current ZigBit reset pushbutton
ZigBit ATZB-RF-233-1-C Amplified module AT86RF233 2.4GHz ISM-Band Transceiver chip with SE2431L RF Front End Module (FEM) RF Output Power: Up to +20dBm Receiver sensitivity: -104dBm Modulation: O-QPSK 16 channels @ 5MHz OTA data rate: 250kbps (IEEE 802.15.4) AES-128 encryption Pre-loaded with Atmel assigned 64-bit MAC address Range: Up to 2000m (open space) 128byte FIFO Tx/Rx buffer Host communication: serial SPI Built-in chip antenna MS-147 RF test connector Power supply: +2.0 to +3.6Vdc Dimensions: 25 x 20 x 3.2mm Applications: Industrial Control, Residential and commercial automation, Health care, Consumer electronics, PC peripherals and local communication for the Internet of Things (IoT)
