Lattice Semiconductor iCE40LP1K-BLINK-EVN iCEblink40 Evaluation Kit iCEblink40-LP1K

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Lattice iCEblink40-LP1K Evaluation Kit

A low-cost platform for evaluating and developing with the low-power iCE40LP1K FPGA. The board provides access to general-purpose I/O and includes capacitive-touch buttons and LEDs. The board is powered and programmed via USB. An on-board microcontroller enables 2-way communication with the iCE40LP1K FPGA. The free iCEcube2™ development tool controls programming, accesses virtual I/O functions and runs the included demos. The tools can be downloaded from the Lattice website.

Low-power, small-footprint iCE40LP1K FPGA in 84-pin QFNS package
USB programming, debugging, virtual I/O functions, and power supply
4 x User LEDs
4 x Capacitive-touch buttons
3.3MHz clock source
1Mbit SPI serial configuration PROM
Supported by Lattice iCEcube2 design software
63 x LVCMOS/LVTTL (3.3V) digital I/O connections on 0.1in through-hole connections
Supports third-party I/O expansion boards and modules, including 3.3V Arduino Shield boards (requires additional sockets, not supplied)

Supplied with

USB cable for power & programming, QuickStart Guide

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specifications
Attribute Value
Programmable Logic Technology FPGA
Kit Classification Evaluation Kit
Featured Device ICEblink40-LP1K
Kit Name ICEblink40
1 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 70.90
(exc. GST)
$ 81.54
(inc. GST)
units
Per unit
1 +
$70.90
Related Products
4 Kbit and 16 Kbit I²C serial EERAM ...
Description:
4 Kbit and 16 Kbit I²C serial EERAM devices. Follows the published recommended capacitor selection for the EERAM device. Test points with probe loops for SCL, SDA, VCC and GNDOn-board pull-ups for I²C bus operationSMD jumper options for 3.3V and ...
The GB60 demonstration kit contains everything a designer ...
Description:
The GB60 demonstration kit contains everything a designer needs to develop and evaluate MC9S08GB or GT Family applications. M9S08GB60 microcontroller32k. Hz crystal for RTCRegulated +3.3V power supply2xRS-232 ports with DB9-S connectorsMCU I/O port connector provides all digital I/OAnalogue or PTB ...
The Renesas Electronics cloud connectivity kit is designed ...
Description:
The Renesas Electronics cloud connectivity kit is designed for fast prototyping of embedded systems, specifically targeting the Internet of Things applications. This kit includes all the components required for the development and debugging of software that can collect information from ...
Description:
The purpose of the Tool. Stick is to provide a development and demonstration platform for Silicon Laboratories C8051Fxxx microcontroller software tools, including the Integrated Development Environment (IDE). The Tool. Stick development platform consists of two components: the Tool. Stick Base ...