Schneider Electric 6 Push Button Pendant Station Yellow, IP65 6 Harmony XACA

Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): ES
Product Details

Standard Pushbutton with Safety Features

Created and designed for predominantly standard or medium-duty control circuit applications, Schneider Electrics push-button pendant station provide a covering case for the internal push button. The enclosures are made up from a rugged, double insulated thermoplastic material. This unit is a simple yet effective mechanical switch which is commonly used to control the hoist and lowering function within a machine or device. Strategically designed for easy handling and operation, even when the user is wearing heavy work gloves.

Common Applications of a Push Button Pendants Station

Pre-assembled pendants for common crane applications
Shrouded, base-mounted, key-release ’Stop’ pushbutton
Switching current 10A
Right / left / hoist / lower functions

• Brought to you complete and pre-assembled
• Double insulated
• Shock and corrosive resistant
• Ease of operation
• Right, left, hoist and lower functions

Routine Maintenance

• Check that the screws on the rear cover are properly tightened
• Check the condition and secureness regularly
• Try to use the genuine replacement parts for any your control stations when needed

Schneider Electric Push Button Pendant Station - XACA06SPEC0280

Forming part of Schneider Electrics Harmony XAC range, these pendant features six push-buttons and one emergency stop button.

Features & Benefits

• Aesthetically pleasing, finished with bright yellow colour, making it easy to locate
• Mechanically durable up to 1000000 cycles
• The unit features an ingress protection rating of IP65, this means that the pendant control station is rated as dust tight and is protected against water projected from a nozzle
• Complete and ready to use
• The connection terminals are screw clamp terminals, 1 x 2.5 mm² with or without cable end and screw clamp terminals, 2 x 1.5 mm² with or without cable end
• The ambient temperature to operate this type of controller is -25…70 °C
• 10 A conventional enclosed thermal current
• Toxic heavy metal and mercury-free

Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65Fitted cable clamps and stepped cable entry bootsMechanical interlocking between each pair of opposing pushbutton actuatorsAdapters supplied for self-supporting pendant cable, with lug for chain support

Attribute Value
Series Harmony XACA
Number of Cutouts 6
Enclosure Colour Yellow
Number Of Push Buttons 6
IP Rating IP65
Length 500mm
Minimum Operating Temperature -25°C
Dimensions 500 x 80 x 107 mm
Depth 107mm
Width 80mm
Maximum Operating Temperature +70°C
6 : Next working day
13 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 440.71
(exc. GST)
$ 506.82
(inc. GST)
Per unit
1 - 2
3 +
Related Products
The Smile 41 push button box is intended ...
The Smile 41 push button box is intended to be used with the Pluto Safety PLC to offer enhanced user friendliness and simplified troubleshooting. This control station provides 4 push buttons or 3 push buttons and an E-stop, depending on ...
Pendant control stations for auxiliary circuits. Designed for ...
Pendant control stations for auxiliary circuits. Designed for mechanical handling, these highly robust pendant control stations comply with the safety requirements of IEC standards. CE markingUL/CSA certificationIP65Double insulated polypropylene casing. Screw clamp connection.
The ’Intuitive’ pendant station offers dual control from ...
The ’Intuitive’ pendant station offers dual control from a single pushbutton, the required movement of the thumb reflecting the movement of the load. The design prevents unwanted operation when not in use. Ergonomically designed to fit the shape of the ...
Pistol-grip pendant control stations for simple hoisting applications. ...
Pistol-grip pendant control stations for simple hoisting applications. All opposing pairs of switches are mechanically interlocked. Switching current 10AIP65 rated. Hoist and lowering functions only.