Schneider Electric 4NO/NC 5 Push Button Pendant Station 3 A ac, 270 mA dc Yellow, 600V, IP65 5 Black, Red, White

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): CZ
Product Details

Standard Pushbutton

Created and designed for predominantly crane applications, Schneider Electrics push-button pendant station provides a covering case for the internal push button. This unit is a simple yet effective mechanical switch which is commonly used to control one function within a machine or device.

Common Applications of a Push Button Pendants Station

Pre assembled double insulated crane pendants for single speed motor applicationsMechanically interlocked between pairsFor light duty Pendant switch see also Stock no 507481

  • Pre-assembled, ready to go
  • Double insulated
  • Commonly used for single speed motor applications
  • Mechanically interlocked between pairs

Schneider Electric Push Button Pendant Station - XACA4713

Forming part of Schneider Electrics Harmony XAC range, this pendant features four push-buttons and one emergency stop button.

Features & Benefits

  • The control button type of the buttons are - third pushbutton 1 NO right - slow, stop pushbutton Ø 40 mm 1 NC - latching, second pushbutton 1 NO lower -slow, fourth pushbutton 1 NO left - slow and first pushbutton 1 NO raise - slow

  • With mechanical interlocking

  • Aesthetically pleasing, finished with bright yellow colour, making it easy to locate

  • Mechanically durable up to 1000000 cycles

  • The cable entry has a rubber sleeve with stepped entry, the cable outer diameter is 0.31...1.02 in (8...26 mm)

  • This pendant control station has a conventional enclosed thermal current of 10A

  • The unit features an ingress protection rating of IP65, this means that the pendant control station is rated as dust tight and is protected against water projected from a nozzle

  • Shock-resistant of 100gn conforming to EIC 60068-2-27

  • Features a rated insulation voltage of 600V (degree of pollution:3) which conforms to IEC 60947-1

  • The rated impulse withstand voltage is 6 kV which conforms to IEC 60947-1

Schneider Electric - Push Buttons

Pendant control stations are used on hoists, overhead cranes and as remote control stations. They conform to EN60947-1, EN60947-5-1, NFC63-140 and VDE0660 part 2 standards. All actuator buttons incorporate 1 N/O and 1 N/C positive action contact rated at 240Vac, 3A I th ;250Vdc, 0.27A I th ; 10A I th allowing electrical cross-interlocking if desired.

Environmental protection to IP65Fitted cable clamps and stepped cable entry bootsMechanical interlocking between each pair of opposing pushbutton actuatorsAdapters supplied for self-supporting pendant cable, with lug for chain support

Attribute Value
Series Harmony XACA
Number of Cutouts 5
Push Button Marking Down Arrow, E-Stop, Left Arrow, Up Arrow
Push Button Colour Black, Red, White
Push Button Style Mushroom
Number Of Push Buttons 5
Enclosure Colour Yellow
Contact Configuration 4NO/NC
IP Rating IP65
Maximum AC Voltage 600V
Minimum Operating Temperature -25°C
Maximum DC Voltage 600V
Terminal Type Screw
Maximum Current 3 A ac, 270 mA dc
Maximum Operating Temperature +70°C
2 : Next working day
16 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 295.82
(exc. GST)
$ 340.19
(inc. GST)
Per unit
1 - 2
3 - 4
5 +