Microchip IoT Network Controller 2.4GHz WiFi Module for ATWINC1510

  • RS Stock No. 146-3395
  • Mfr. Part No. ATWINC1500-MR210PB1952
  • Manufacturer Microchip
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

Microchip's WINC1500 is an IEEE 802.11 b/g/n IoT network controller. It is the ideal add-on to existing MCU solutions bringing Wi-Fi and Network capabilities through SPI-to-Wi-Fi interface. The WINC1500 connects to any SAM, PIC24 and PIC32 MCU with minimal resource requirements. The WINC1500's most advanced mode is a single stream 1x1 802.11n mode providing up to 72 Mbps PHY throughput. The WINC1500 features a fully integrated Power Amplifier, LNA, Switch and Power Management. The WINC1500 provides internal Flash memory as well as multiple peripheral interfaces including UART and SPI. The only external clock source needed for the WINC1500 is a high-speed crystal or oscillator (26 MHz). The WINC1500 is available in a QFN package or as a certified module. The ATWINC1500 has 4 Mb of flash memory which can be used for system software. The ATWINC1510 has 8 Mb flash memory for even greater flexibility.

Single-band 2.4GHz b/g/n
Extreme low power
Compact footprint: 5 x 5 mm QFN
Operating voltage: 3.0V to 4.2V
Serial host interface: SPI
Security protocols supported: WPA/WPA2 Personal, TLS, SSL
Network services: DHCP, DNS, TCP/IP (IPv4), UDP, HTTP, HTTPS
Antenna Options:
Chip and PCB antenna (ATWINC1500-MR210PB)
Chip and u.FL connector (ATWINC1500-MR210UB)
Available in a fully-certified module package:
ATWINC1500-MR210PB1952 (4Mb flash)
ATWINC1510-MR210PB1952 (8Mb flash)
Part numbers reflect SW version, now available with SDK v19.5.2
ATWINC15x0-MR210xB1952
Recommended for new designs
SDK 19.5.2 with TLS v1.2 server mode support, Crypto ECC508 integration, WPA2 security to AP mode & more
Integrated into Atmel Studio 7 - See ASF release notes
ATWINC1510-MR210PB1944 (Legacy SDK)
Atmel Software Framework (ASF) Free Software download available

Specifications
Attribute Value
RF Technology WiFi
Kit Classification Module
Featured Device ATWINC1510
Kit Name IoT Network Controller
Frequency 2.4GHz
4 : Next working day
83 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 12.24
(exc. GST)
$ 14.08
(inc. GST)
units
Per unit
1 +
$12.24
Related Products
A tiny screen yet delivers huge contrast and ...
Description:
A tiny screen yet delivers huge contrast and brightness and is perfect for displaying text or graphics. OLED screens do not need a backlight helping them to be energy efficient. Current draw depends on usage as each OLED LED draws ...
This quad-bearing gimbal joystick provides a two-axis resistive ...
Description:
This quad-bearing gimbal joystick provides a two-axis resistive output for controlling parameters such as position, velocity and tilt. It can be interfaced to any microcontroller with at least two analogue input channels. 5 kΩ linear-taper potentiometer on each axis. Smooth ...
The UMFT231XC is a USB to UART development ...
Description:
The UMFT231XC is a USB to UART development module with battery charging support.Configured with a LTC4053EDD lithium-ion battery charger. Charging a battery of a device via USB slave port, with either 1 Ampere of current from a dedicated charger port ...
A000066 (715-4081) - DIP Packages A000073 (769-7409) - ...
Description:
A000066 (715-4081) - DIP Packages A000073 (769-7409) - SMD Packages The Arduino UNO Wi. Fi V2 is a development board which features the ATMega 4809 processor.(MCU). It is a perfect introduction to electronics and coding. The UNO also demonstrates the ...