FAG NJ208-E-XL-TVP2-C3 40mm I.D Cylindrical Roller Bearing, 80mm O.D
- RS Stock No.:
- 194-7338
- Mfr. Part No.:
- NJ208-E-XL-TVP2-C3
- Brand:
- FAG
On back order for despatch 11/06/2024, delivery within 7 working days from despatch date.
Added
Price (ex. GST) Each
$150.43
(exc. GST)
$172.99
(inc. GST)
| Units | Per unit |
| 1 - 12 | $150.43 |
| 13 - 24 | $146.21 |
| 25 + | $142.28 |
- RS Stock No.:
- 194-7338
- Mfr. Part No.:
- NJ208-E-XL-TVP2-C3
- Brand:
- FAG
Technical data sheets
Legislation and Compliance
Product Details
Single row cylindrical roller bearings with cage are suitable where:
Bearing arrangements are subjected to very high radial loads
Not only high radial forces but also axial loads from one or both directions must be supported by the bearing position (semi-locating or locating bearing function)
Bearing arrangements must have very high rigidity
Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing (in the case of bearings with a non-locating or semi-locating bearing function)
High radial loads and very high speeds occur but the very high radial load carrying capacity of full complement cylindrical roller bearings is not required
The bearings should be separable (one bearing ring can be removed) for easier mounting
Bearing arrangements are subjected to very high radial loads
Not only high radial forces but also axial loads from one or both directions must be supported by the bearing position (semi-locating or locating bearing function)
Bearing arrangements must have very high rigidity
Axial displacements of the shaft relative to the housing must be compensated without constraint in the bearing (in the case of bearings with a non-locating or semi-locating bearing function)
High radial loads and very high speeds occur but the very high radial load carrying capacity of full complement cylindrical roller bearings is not required
The bearings should be separable (one bearing ring can be removed) for easier mounting
Specifications
Attribute | Value |
|---|---|
| Inside Diameter | 40mm |
| Outside Diameter | 80mm |
| Roller Bearing Type | Cylindrical |
| Race Width | 18mm |
| Bore Type | Parallel |
| Static Load Rating | 53000N |
| Number of Rows | 1 |
| Dynamic Load Rating | 63000N |
| End Type | Open |
| Fatigue Limit Load | 8500N |