Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	SKF
	Product Type	Rotary Shaft Seal
	Material	Rubber Metal Reinforced
	Inside Diameter	72mm
	Outside Diameter	100mm
	Minimum Operating Temperature	-25°C
	Thickness	10mm
	Maximum Operating Temperature	200°C
	Standards/Approvals	ISO 6194, DIN 3760

	Select all
	Brand SKF
	Product Type Rotary Shaft Seal
	Material Rubber Metal Reinforced
	Inside Diameter 72mm
	Outside Diameter 100mm
	Minimum Operating Temperature -25°C
	Thickness 10mm
	Maximum Operating Temperature 200°C
	Standards/Approvals ISO 6194, DIN 3760

COO (Country of Origin):: CN

SKF Rotary Shaft Seal, 72mm Inside Diameter, 100mm Outside Diameter - 72X100X10 HMSA10 V

This rotary shaft seal provides a sealing solution for rotating equipment where oil containment and environmental exclusion are required. It is designed for radial installation on shafts and suits industrial settings in automation, electronics, electrical and mechanical sectors. The component uses compounded elastomer and metal reinforcement to maintain sealing contact under dynamic conditions.

Features and Benefits:

• Rubber–metal reinforced construction for sustained sealing performance
• Rated to operate up to 200°C for high-temperature applications
• Withstands environments down to -25°C for cold-start reliability
• Conforms to ISO 6194 for dimensional and functional consistency
• Meets DIN 3760 for interchangeability with common industry components

Applications

• Suitable for pumps requiring oil retention in manufacturing plants
• Ideal for electric motor shaft sealing in control cabinets
• Used with gearboxes in conveyor and automation systems
• Can be used for rotating assemblies in test and measurement rigs

What shaft size does this seal accept?

The seal fits shafts with an internal diameter of 72mm, ensuring correct radial contact for effective fluid retention.

How thick is the sealing element and why does it matter?

The axial thickness is 10mm which provides a Compact profile while maintaining adequate lip engagement and axial stability in housings.

Which external dimension should housings accommodate?

The outer diameter of the component is 100mm, so housings must permit a press-fit or appropriate retention for that outside measurement.

What materials compose the sealing assembly?

The construction combines elastomeric sealing material bonded to a metallic reinforcement to preserve lip preload and resist distortion during operation.

SKF Rubber Metal Reinforced Rotary Shaft Seal, 72 mm ID, 100 mm OD

FREE delivery for orders over $60.00 ex GST