Digilent 410-251 Programming Module for use with FPGA Devices

  • RS Stock No. 134-6434
  • Mfr. Part No. 410-251
  • Manufacturer Digilent
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
Product Details

JTAG-SMT2 SMT Programming Module

The JTAG-SMT2 surface-mount programming module allows high-speed programming of Xilinx FPGA devices from a host PC. Users can solder the module directly onto a target board like any other component. Note: The JTAG-SMT2-NC part (RS 134-6473) does not have a USB connector fitted.

Features

• Compatible with all Xilinx tools
• Compatible with IEEE 1149.7-2009 Class T0 - Class T4 (includes 2-Wire JTAG)
• On-board ADP123AUJZ 300mA voltage regulator
• Separate Vref drives JTAG/SPI signal voltages
• Vref can be any voltage between +1.8V and +5V
• USB 2.0 HS port drives JTAG/SPI bus at up to 30Mbit/sec
• JTAG/SPI frequency settable by user
• PC connector: MicroUSB (JTAG-SMT2 only)
• GPIO pin allows processor reset of Xilinx Zynq platform
• SPI programming modes 0/2 up to 30Mbit/sec, modes 1/3 up to 2Mbit/sec
• Fully supported by Digilent's Adept software and Adept SDK
• Board dimensions: 22.75 x 21.5mm

RS Product Codes

134-6434 JTAG-SMT2 SMT Module
134-6473 JTAG-SMT2-NC SMT Module (without USB connector)

Note

This module is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Specifications
Attribute Value
Accessory Type Programming Module
For Use With FPGA Devices
63 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 121.92
(exc. GST)
$ 140.21
(inc. GST)
units
Per unit
1 +
$121.92
Related Products
HRLV-EZ Series Maxbotix Ultrasonic Rangefinders are high performance ...
Description:
HRLV-EZ Series Maxbotix Ultrasonic Rangefinders are high performance sensors with high resolution, excellent noise rejection, automatic calibration and factory set beam patterns. These small, lightweight sensor modules have three outputs: analogue voltage, digital PWM, and RS232 or TTL serial data. ...
The VM800P is a development module, designed to ...
Description:
The VM800P is a development module, designed to provide engineers with everything necessary to create quality Human Machine Interface (HMI) solutions with display, audio and touch functionality.This completely Arduino-compatible module features an FT800 chip for three in one operation (display, ...
The VM801P is a Graphics Display Development Kit ...
Description:
The VM801P is a Graphics Display Development Kit by FTDI chip that is designed to work alongside the FT801. It is used to develop and demonstrate the functionality of the FT801 Embedded Video Engine, EVE. The VM801P is a stand-alone ...
The VM810C is a development module for the ...
Description:
The VM810C is a development module for the FTDI FT810 graphics engine device. It supports any LCD panel that meets the FT810 technical specification and fits the VM810C display connector. FT810 EVE2 Embedded Graphics Engine device40-way Flex-Cable connector for LCD ...