Wago Milivolt Transducer Signal Conditioner, Voltage ATEX, IECEx, 0 → 1000 mV, -100 → 100 mV Input

  • RS Stock No. 135-7396
  • Mfr. Part No. 857-819
  • Manufacturer Wago
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

857 Series Voltage Signal Conditioner

Wago 857 series JUMPFLEX millivolt signal conditioner converts input millivolt signals into an analogue standard signal on the output side.

Features and Benefits

PC configuration interface Switching between measurement ranges is calibrated
Clipping capability allows analogue signal limitation to output end values
Safe 3 way isolation with 2.5 kV test voltage per EN 61140

Wago JUMPFLEX Isolation Amplifiers and Signal Conditioners

Specifications
Attribute Value
Input Range -100 → 100 mV, 0 → 1000 mV
Output Range 0 → 10 V, 0 → 20 mA
Supply Voltage 24 V dc
Mounting Type DIN Rail
Minimum Operating Temperature -25°C
Maximum Operating Temperature +70°C
Standards Met ANSI/ISA 12.12.01, BV, Conformity Marking, CULus, DNV, EMC EN 61000-6-2, EMC EN 61000-6-4, EN 61140, GL, IECEx TUN 14.0030 X, NKK, PRS, RoHS Compliant, TUV 14 ATEX 112692 X, UL 508
Interface APP Configuration Interface, PC Configuration Interface, Software Configuration Interface
Operating Temperature Range -25 → +70 °C
Termination Push-In
Hazardous Area Certification ATEX, IECEx
On back order for despatch 17/09/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 358.13
(exc. GST)
$ 411.85
(inc. GST)
units
Per unit
1 +
$358.13
Related Products
RS Pro single or dual trip amplifiers with ...
Description:
RS Pro single or dual trip amplifiers with the facility to arrange each trip so that the alarm condition can be above (high trip) or below (low trip) the set point. The relay can be either energise/de-energise in the alarm ...
Siemens Sirius 3RS70 signal converters perform the coupling ...
Description:
Siemens Sirius 3RS70 signal converters perform the coupling function for analogue signals on both the input side and the output side. They are indispensable when processing analogue values with electronic controls. Under harsh industrial conditions in particular, it is often ...
The MTLx581 takes a low-level dc signal from ...
Description:
The MTLx581 takes a low-level dc signal from a voltage source in a hazardous area, isolates it, and passes it to a receiving instrument located in the safe area. The module is intended for use with thermocouples utilising external cold-junction ...
The MTLx525 enables an on/off device in a ...
Description:
The MTLx525 enables an on/off device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area. It can drive loads such as solenoids, alarms, LEDs and other low power devices that are ...