MTL MTL5000, Isolation Signal Conditioner, Voltage 1.4 → 4.5 V dc Input, 7.8 → 24 V Output

  • RS Stock No. 174-7908
  • Mfr. Part No. MTL5525
  • Manufacturer MTL
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): GB
Product Details

The MTLx525 enables an on/off device in a hazardous area to be controlled by a volt-free contact or logic signal in the safe area. It can drive loads such as solenoids, alarms, LEDs and other low power devices that are certified as intrinsically safe or are classified as non-energy storing simple apparatus. The MTL4525 allows a second safe-area switch or logic signal to be connected that enables the output to be disabled to permit, for example, a safety system to override a control signal.

Compact modular design with DIN rail mounting
High packing density
Single and multi-channel I/O modules
3-port isolation with low power dissipation
Compatible with MTL5000

Specifications
Attribute Value
Input Range 1.4 → 4.5 V dc
Output Range 7.8 → 24 V
Mounting Type DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +60°C
Termination Cable
Number of Channels 1
Operating Temperature Range -20 → +60 °C
Series MTL5000
8 : Next working day
11 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
Was $459.14
$ 429.94
(exc. GST)
$ 494.43
(inc. GST)
units
Per unit
1 +
$429.94
Related Products
The intrinsically safe interface blocks of the MACX ...
Description:
The intrinsically safe interface blocks of the MACX Analog Ex series offer the widest range of functions in the narrowest design. Ex-i signal conditioner for many applications. Electrical 3-way isolation. Screw or spring-cage connections are availableIP20 protection. Width only 12.5 ...
MINI MCR series limit value switches, with adjustable ...
Description:
MINI MCR series limit value switches, with adjustable hysteresis and delay time and spring-cage connection. Power supply possible via the foot element (T-connector)Status and error indication via two diagnostic LEDsPDT relay at output3-way isolation. Limit value can be freely adjusted ...
Wago 857 series JUMPFLEX threshold value switch for ...
Description:
Wago 857 series JUMPFLEX threshold value switch for monitoring analogue standard signals and reporting signals exceeding a preset threshold. PC configuration interface Digital switching output Changeover contact relay output Calibrated scale switching Threshold value configuration via DIP switches and teach-in ...
Wago 857 series JUMPFLEX loop powered RTD temperature ...
Description:
Wago 857 series JUMPFLEX loop powered RTD temperature signal conditioner records Pt100, Pt200, Pt500 and Pt1000 sensors and resistors up to 4.5 kΩ, converting the temperature signal into an analogue signal on the output side. No additional supply voltage required ...