Phoenix Contact MCR-SL-S-16-SP-24, Isolation Current Limit Switch, Current 0 16 A Input

Technical data sheets
Legislation and Compliance
Non Compliant
COO (Country of Origin): DE
Product Details

Current Limit Switch, MCR-SL-S-16-SP-24

Converts 50/60Hz AC currents up to 16A into binary signals
Limit adjustable
Galvanic isolation
Relay output
Relay contact rating: 2A @ 250Vac/dc

Specifications
Attribute Value
Input Range 0 16 A
Supply Voltage 20 30 V dc
Mounting Type DIN Rail
Minimum Operating Temperature -20°C
Maximum Operating Temperature +65°C
Operating Temperature Range -20 +65 °C
Series MCR-SL-S-16-SP-24
1 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 223.83
(exc. GST)
$ 257.40
(inc. GST)
units
Per unit
1 +
$223.83
Related Products
This Switch can be mounted on DIN rail ...
Description:
This Switch can be mounted on DIN rail individually, or with other units. The housing is 102.5mm high by 6.2mm wide.The performance specifications are similar to standard sized MCR products. Requires a 24Vdc supply. Input, 0-20mA, 0-10VAdjustable alarm switching point ...
For Pt100 or thermocouples. Measurement range and output ...
Description:
For Pt100 or thermocouples. Measurement range and output signal configurable3-way isolation. Diagnostic LED for analysing faults. Power supply via feed terminal and mounting rail bus connector (stock no. 489-2825) possible. Screw or spring-loaded connector. Overall width 6.2 mm.
This signal duplicator can be mounted on DIN ...
Description:
This signal duplicator can be mounted on DIN rail individually, or with other units. The housing is 102.5mm high by 6.2mm. The performance specifications are similar to standard sized MCR products.,The inputs are listed as: 0-20mA, 4-20mA, 1-5V, 0-10V etc, ...
Can can be mounted on DIN rail individually ...
Description:
Can can be mounted on DIN rail individually or with other units. The housing is 102.5mm high by 6.2mm wide. The performance specifications are similar to standard sized MCR products.,Required a 24Vdc supply, either directly to module terminals or via ...