PR Electronics 3105, Analogue to Current Signal Conditioner, Analogue ATEX,

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DK
Product Details

3105 Type - Isolated Converter

3105 type is for isolation and conversion of standard DC signals.
Suitable for galvanic separation of analog DC signals and elimination of ground loops and measurement of floating signals.

Features and Benefits

Conversion of standard DC signals
Slimline housing of 6 mm
DIP-switch configured
Input is protected against overvoltage and polarity error
Inputs and outputs are floating and galvanically separated
Suitable for environments with high vibration stress, e.g. ships

DIP-switch programming

Re-calibration is not needed after changing the DIP-switch range settings. Just change the DIP-switch, cycle the power to the unit and obtain the new, pre-calibrated I/O range. HART programming is enabled for selected devices.

Mounting

Devices can be mounted both vertically and horizontally with no air gap separation required. The devices snap onto a power rail or DIN rail and are easily detached by lifting the bottom lock.

High level of isolation

Safe galvanic isolation of 2.5 kVAC provides high noise immunity and prevents ground loops for accurate delivery of the process signal to your control system.

Device status indicators

A front LED indicates device status, e.g. an error in the set-up, sensor or hardware.

Over voltage- / polarity protection

All terminals can withstand up to ±31.2 VDC and are protected against incorrect supply wiring to ensure safe, error-free installation.

PR Electronics DIN Rail Mounting

Specifications
Attribute Value
Input Range 0 → 10.25 V, 0 → 20.5 mA
Output Range 0 → 10 V dc, 0 → 20.5 mA
Supply Voltage 16.8 → 31.2 V dc
Mounting Type DIN Rail
Minimum Operating Temperature -25°C
Maximum Operating Temperature +70°C
Operating Temperature Range -25 → +70 °C
Hazardous Area Certification ATEX
Series 3105
2 Within 5 working day(s) (Global stock)
9 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 262.35
(exc. GST)
$ 301.70
(inc. GST)
units
Per unit
1 +
$262.35
Related Products
This product offers smart gateway between ethernet and ...
Description:
This product offers smart gateway between ethernet and serial protocols. Additional features to speed up your Modbus Communication or exchange data easily in a network without the need for any Modbus master intervention.Moreover, there is no need for additional software ...
Wago JUMPFLEX Bluetooth adapter wirelessly connects a PC ...
Description:
Wago JUMPFLEX Bluetooth adapter wirelessly connects a PC computer with Bluetooth functionality to the service interface of configurable 857/2857 series modules. As a cable substitute, the Bluetooth adapter allows communication between JUMPFLEX modules and the Wago software tool (Wagoframe) or ...
Output loop-powered temperature transducer, two universal inputs for ...
Description:
Output loop-powered temperature transducer, two universal inputs for thermocouples, resistance and voltage sensor, HART communication, freely configurable, installable in Zone 2, SIL 2/3.
Can be mounted on DIN rail individually or ...
Description:
Can be mounted on DIN rail individually or with other units. Housing is 102.5mm high by 6.2mm wide. The performance specifications are similar to standard sized MCR products. Input, 2,3 or 4 wire PT100Temperature range –150 to +850°COutput, 4-20mA, 0-20mA, ...