Hydralectric Solenoid Valve 72003, 2 Port, NC, 12 V dc

RS Stock No.:: 342-023
Mfr. Part No.:: 72003
Brand:: Hydralectric

Bulk discount available

Subtotal (1 unit)*

$73.38

(exc. GST)

$84.39

(inc. GST)

FREE delivery for orders over $60.00 ex GST

In Stock

1,575 unit(s) ready to ship from another location
Plus 7 unit(s) shipping from 08 April 2026

Need more? Click ‘Check delivery dates’ to find extra stock and lead times.

Units	Per unit
1 - 24	$73.38
25 +	$64.87

*price indicative

RS Stock No.:: 342-023
Mfr. Part No.:: 72003
Brand:: Hydralectric

Specifications

Technical data sheets

Legislation and Compliance

Product Details

Find similar products by selecting one or more attributes.

Select all	Attribute	Value
	Brand	Hydralectric
	Product Type	Solenoid Valve
	Supply Voltage	12 V dc
	Number of Ports	2
	Default Valve Position	NC
	Orifice Diameter	31.8mm
	Series	720
	Body Material	Polyamide
	Application	Refrigeration Equipment, Hand Washers, Automatic Tap System, Water
	Maximum Operating Pressure	10 bar
	Minimum Operating Temperature	60°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	No
	Hazardous Area Certification	No
	Maximum Closing Time	5min
	Maximum Opening Time	3min

	Select all
	Brand Hydralectric
	Product Type Solenoid Valve
	Supply Voltage 12 V dc
	Number of Ports 2
	Default Valve Position NC
	Orifice Diameter 31.8mm
	Series 720
	Body Material Polyamide
	Application Refrigeration Equipment, Hand Washers, Automatic Tap System, Water
	Maximum Operating Pressure 10 bar
	Minimum Operating Temperature 60°C
	Maximum Operating Temperature 60°C
	Standards/Approvals No
	Hazardous Area Certification No
	Maximum Closing Time 5min
	Maximum Opening Time 3min

Hydralectric 2 Way Water Solenoid Valve

The Hydralectric 1/2in BSP male solenoid valve has a supply voltage of 12VDC. This 2-port valve is continuously rated when the fluid temperature is below 25°C, the ambient temperature is below 60°C and the flow rate is above 5L/min. It requires a duty cycle of 40% for fluid temperatures up to 90°C. It is ideal for controlling water pressure 0.2bar to 10 bar.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the operation of the valve when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Features and Benefits

Flow factor (Kv) is 17L/min

Maximum working pressure is 10bar

Power consumption is 6W

Spade coil terminals of 1/4in

Solenoid coil is wound so either voltage can be passed through it

Applications

Hand washers

Refrigeration equipment and automatic tap systems

Certifications

EN 60730-2-8

UL429 listed

BEAB approved

NSF approved

WRAC approved