Burkert Solenoid Valve 141246, 2 port , NC, 230 V ac, 1in

  • RS Stock No. 468-015
  • Mfr. Part No. 141246
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Two-way General Purpose Solenoid Valves, Type 6213

The valve can be mounted in any position, but mounting with coil uppermost is preferred.

Normally closed solenoid valves suitable for use with oil, fat without additives, water and neutral fluids
BSP parallel ports suitable for use with compression fittings
Epoxy encapsulated coils
Three-pin DIN connector rated to IP65 can be positioned through 360° in 90° increments
0-10 bar pressure range
Nominal coil power 8W
Maximum operating temperature 55°C
Power consumption 21VA (Inrush, AC); 12 VA/8 W (Constant, AC); 8W (DC)
Protection to IP65

//media.rs-online.com/t_line/L439060-04.gif
//media.rs-online.com/t_line/L439240-02.gif

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Operation Pilot
Connection 1 in G Female
Connection Size 1in
Default Valve Position NC
Suitable Applications Hot Oil with Additives
Type 2/2
Orifice Diameter 20mm
Body Material Stainless Steel
Maximum Working Pressure 10 bar
Operating Temperature Range Maximum of +55 °C
Maximum Operating Temperature +55°C
Maximum Opening Time 4s
Connection Gender Female
Maximum Closing Time 4s
Thread Standard or Connection Type G
Flow Factor Kv 8.3m³/h
Series 6213
2 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 695.07
(exc. GST)
$ 799.33
(inc. GST)
units
Per unit
1 +
$695.07
Related Products
The SMC VX3000 series is a direct acting, ...
Description:
The SMC VX3000 series is a direct acting, 3 port solenoid valve. Suited to various applications such as air, oil, water and steam. Valves are easily replaced without changing existing piping. DIN electrical connection. Class B & Class H coil ...
Diaphragm valves for partially aggressive gaseous and liquid ...
Description:
Diaphragm valves for partially aggressive gaseous and liquid media. Suitable for vacuum. For systems with low or fluctuating pressure conditions. Defined flow direction. Valve works without minimum pressure differential. Electromagnetically actuated. With forced lift. Closing damping. Without tool, interchangeable ...
The Parker 2in BSP female solenoid valve has ...
Description:
The Parker 2in BSP female solenoid valve has a supply voltage of 230VAC. This 2-port valve has a brass body with NBR seal offering vast chemical compatibilities. It is ideally suitable for air, liquids and gases. It has a modular ...
Direct-acting, rigid PVC bodied valves for use with ...
Description:
Direct-acting, rigid PVC bodied valves for use with aggressive gases and liquids, bases and acids up to a medium concentration. Separate diaphragm isolates the actuator from the fluid. Insensitive to contaminated fluids, except sharp solid and long fibres. No differential ...