RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.
 
MPN

Burkert Solenoid Valve 134437, 2 port , NC, 230 V ac, 3/4in


10 In stock for delivery within 7 working day(s)
Add to Basket

Price (ex. GST) Each

$438.52

(exc. GST)

$504.30

(inc. GST)

units

Added

RS Stock No.:
468-033
Mfr. Part No.:
134437
Manufacturer:
Burkert
COO (Country of Origin):
DE
unitsPer unit
1 - 5$438.52
6 +$428.46

Two-Way General Purpose Solenoid Valves, Type 5282


The Type 5282 Burkert solenoid valve is specially characterised by its design in which there is fluid separation by the inclusion of a diaphragm seal in the pilot valve. This enables the coil to remain protected from the effects of challenging applications.


Features and Benefits


Less sensitive to dirty fluids and corrosion resistant due to separating diaphragm
Suitable for use with neutral gases and liquids

Long-life solenoid system

High reliability

Opening and closing times controlled by integrated restrictor screws

Lockable manual override as standard

NBR seal material

Protection to IP65


Product Application Information


This range of Burkert solenoid valves satisfys the European standards for drinking water.


Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

AttributeValue
Supply Voltage230 V ac
Number of Ports2
OperationPilot
Connection3/4 in G Female
Connection Size3/4in
Default Valve PositionNC
Suitable ApplicationsNeutral Media
Type2/2
Orifice Diameter20mm
Body MaterialBrass
Maximum Working Pressure10 bar
Operating Temperature Range0 → +55 °C
Minimum Operating Temperature0°C
Maximum Operating Temperature+55°C
Maximum Closing Time4s
Maximum Opening Time0.8s
Connection GenderFemale
Servo AssistYes
Flow Factor Kv6.5m³/h
Series5282
Thread Standard or Connection TypeG