Burkert Solenoid Valve 425299, 3 port , NC, 24 V dc, 1/8in

  • RS Stock No. 468-106
  • Mfr. Part No. 425299
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details
//media.rs-online.com/t_line/L313201-01.gif

Burkert Solenoid Valve

The Burkert 6012P series 1/8inG female solenoid valve has a supply voltage of 24VDC. This 3-port NC position valve is a screwed coil system with FKM seal. It has Banjo threaded connection for direct mounting on pneumatic valves. Its maximum opening and closing time are 12ms and 12ms. It is suitable for compressed air, water and hydraulic oil.
Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the operation of the valve when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right-hand side of the diagram, see the typical schematic diagram below. The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Features and Benefits

Flow factor(Kv) is 0.045m³/h
Maximum working pressure is 10bar
Power consumption is 4W
Direct-acting, compact valve with diameter of up to DN 1.6
Coil changed easily with valve in place
Coil can be locked in four by 90° positions or move free between, as required
Simple and quick push-in, flange, or manifold installation
Operating temperature ranges between -10°C and 55°C

Certifications

IP65 rated

Specifications
Attribute Value
Supply Voltage 24 V dc
Number of Ports 3
Operation Direct
Connection 1/8 in G Male
Connection Size 1/8in
Default Valve Position NC
Suitable Applications Gas, Liquid
Type 3/2
Orifice Diameter 1.2mm
Body Material Polyamide
Maximum Working Pressure 10 bar
Operating Temperature Range Maximum of +55 °C
Maximum Operating Temperature +55°C
Maximum Opening Time 12ms
Connection Gender Male
Maximum Closing Time 12ms
Thread Standard or Connection Type G
Series 6012P
9 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 135.43
(exc. GST)
$ 155.74
(inc. GST)
units
Per unit
1 - 5
$135.43
6 - 11
$132.74
12 +
$131.69
Related Products
Burkert proportional solenoid valves provide continuously adjustable and ...
Description:
Burkert proportional solenoid valves provide continuously adjustable and smooth control over the flow of fluid passing through them. Unlike conventional solenoid and process valves which offer only On or off control, Burkert 2871 series process valves use PWM (pulse width ...
The VZWD series of directly actuated solenoid valves ...
Description:
The VZWD series of directly actuated solenoid valves are ideal for use in high-pressure applications with low flow rates. The valve is able operate without differential pressure at up to 15 bar, even in closed media circuits. Operate with water, ...
Valves and control modules designed specifically to operate ...
Description:
Valves and control modules designed specifically to operate together, provide a valve opening which is proportional to the input signal and allows this to be correlated to the respective operating conditions. Control solenoids, signalling support and mini-sensor for E290 series ...
The Burkert 6013 series 1/8in G female solenoid ...
Description:
The Burkert 6013 series 1/8in G female solenoid valve has a supply voltage rating of 24VDC. This 2-port NC position valve is a vibration-proof, bolted coil system and has high-quality seal material FKM as standard. The stopper and plunger guide ...