RS Components
Our website uses cookies and similar technologies to provide you with a better service while searching or placing an order, for analytical purposes and to personalise our advertising to you.
 
MPN

Asco Solenoid Valve SCG356B466VMS 24DC, 3 port , NC, 24 V dc, 1/4in

This image is representative of the product range


3 In stock for delivery within 7 working day(s)
Add to Basket

Price (ex. GST) Each

$127.82

(exc. GST)

$146.99

(inc. GST)

units

Added

RS Stock No.:
488-661
Mfr. Part No.:
SCG356B466VMS 24DC
Manufacturer:
Asco

RoHS Status: Not Applicable

unitsPer unit
1 - 5$127.82
6 - 11$126.15
12 +$125.11

Three-way, Zero Pressure, N/C Valves


Three-way solenoid valves with zero bar minimum operating pressure, normally closed with threaded port connection.


Brass body
Pressure not required for operation
Compact & lightweight
DIN plug connection
Ranging from -10°C to +100°C
Can be mounted in any position


3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

AttributeValue
Supply Voltage24 V dc
Number of Ports3
OperationDirect
Connection1/4 in G Female
Connection Size1/4in
Default Valve PositionNC
Suitable ApplicationsAir, Inert Gas, Oil, Water
Type3/2
Orifice Diameter1.6mm
Body MaterialBrass
Maximum Working Pressure10 bar
Operating Temperature Range-10 → +60 °C
Minimum Operating Temperature-10°C
Maximum Operating Temperature+60°C
Series356
Maximum Closing Time10ms
Thread Standard or Connection TypeG
Flow Factor Kv0.08m³/h
Connection GenderFemale
Maximum Opening Time10ms