Sirai Solenoid Valve S205-03-Z530A-3,4-24VCC, 2 port , NO, 24 V dc

  • RS Stock No. 407-1832
  • Mfr. Part No. S205-03-Z530A-3,4-24VCC
  • Manufacturer Sirai
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): IT
Product Details

2/2 solenoid pinch valves

Solenoid pinch valves; only the tube is in contact with the fluid.
High flow coefficient.
For use with flexible silicone hoses or hoses with equivalent elasticity and hardness (50 Shore A hardness).
DIN 43650-Form A Standard solenoid valve connector for DIN 46340 (3-contact) quick connection. Type DIN 46340 corresponds to the standard for Faston tabs.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 24 V dc
Number of Ports 2
Operation Direct
Default Valve Position NO
Type 2/2
Body Material Aluminium
Operating Temperature Range -10 → +60 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +60°C
Series S205
12 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 201.94
(exc. GST)
$ 232.23
(inc. GST)
units
Per unit
1 +
$201.94
Related Products
Two-way, brass-bodied WRAS listed solenoid valves with anti-water ...
Description:
Two-way, brass-bodied WRAS listed solenoid valves with anti-water hammer devices fitted as standard. They have a zero bar minimum operating pressure and are normally closed. The compact, lightweight unit may be mounted in any position (however, for optimum life, certain ...
Parker 2-way solenoid valves are used in a ...
Description:
Parker 2-way solenoid valves are used in a wide variety of applications with or without pressure differential. Ideally suited for air, liquids and gases, these valves are available with a brass or stainless steel body. Compressors. Water dispensing & purification. ...
The Festo VZWM series 3/4in connection stainless steel ...
Description:
The Festo VZWM series 3/4in connection stainless steel solenoid valve is a normally closed poppet valve with a diaphragm seal and a supply voltage of 24VDC. It has a pilot operation and two ports. The mounting type of this valve ...
Solenoid valves with and without EEx permit. Stainless ...
Description:
Solenoid valves with and without EEx permit. Stainless steel design. For partially aggressive liquids and gases. Suitable for vacuums. Compact actuation magnet with integrated sleeve. Valve operates without minimum pressure differential (Δp)ΔMagnet can be replaced without tools (Click-on®).