Asco Solenoid Valve SCG356B002VMS.230/50, 3 port , NC, 230 V ac, 1/8in

  • RS Stock No. 610-8958
  • Mfr. Part No. SCG356B002VMS.230/50
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): FR
Product Details

Direct control 3//2 solenoid valves, series 356

3//2 NC direct control solenoid valves.
Compact and lightweight for easy installation.
No minimum control pressure.
Standard manual control.
Brass body.
Pluggable connectors.
Mounted via 2 tapped holes on lower section.

//media.rs-online.com/t_line/LF306181-10.gif

3 Way Inert Gases and Fluid Valves

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and this is described on the right hand side of the diagram, see the typical schematic diagram below.,The 3//2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2//2-way valves as two-way.,The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications will indicate the appropriate connections and pressure capabilities should an alternative circuit function be required.

Specifications
Attribute Value
Supply Voltage 230 V ac
Number of Ports 3
Operation Direct
Connection 1/8 in G Female
Connection Size 1/8in
Default Valve Position NC
Suitable Applications Air, Inert Gas, Oil, Water
Type 3/2
Orifice Diameter 1.6mm
Body Material Brass
Maximum Working Pressure 10 bar
Operating Temperature Range -10 → +100 °C
Minimum Operating Temperature -10°C
Maximum Operating Temperature +100°C
Maximum Opening Time 10ms
Series 356
Thread Standard or Connection Type G
Maximum Closing Time 10ms
Flow Factor Kv 0.08m³/h
Connection Gender Female
6 Within 5 working day(s) (Global stock)
13 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 91.52
(exc. GST)
$ 105.25
(inc. GST)
units
Per unit
1 +
$91.52
Related Products
The SMC VX3000 series is a direct acting, ...
Description:
The SMC VX3000 series is a direct acting, 3 port solenoid valve. Suited to various applications such as air, oil, water and steam. Valves are easily replaced without changing existing piping. DIN electrical connection. Class B & Class H coil ...
The Burkert 6012P series 1/8inG female solenoid valve ...
Description:
The Burkert 6012P series 1/8inG female solenoid valve has a supply voltage of 24VDC. This 3-port NC position valve is a screwed coil system with FKM seal. It has Banjo threaded connection for direct mounting on pneumatic valves. Its maximum ...
Valves and control modules designed specifically to operate ...
Description:
Valves and control modules designed specifically to operate together, provide a valve opening which is proportional to the input signal and allows this to be correlated to the respective operating conditions. Control solenoids, signalling support and mini-sensor for E290 series ...
The Burkert 3-port 1/4in G female solenoid valve ...
Description:
The Burkert 3-port 1/4in G female solenoid valve is a vibration-proof, bolted coil system. It has high-quality seal material FKM as standard. It has a banjo-threaded connection for direct mounting on pneumatic valves. The stopper and plunger guide tube are ...