Asco Solenoid Valve SC E263A210 LT-230V 50HZ, 2 port , NC, 230 V ac, 3/8in

  • RS Stock No. 656-3478
  • Mfr. Part No. SC E263A210 LT-230V 50HZ
  • Manufacturer Asco
Technical data sheets
Legislation and Compliance
RoHS Status: Not Applicable
COO (Country of Origin): FR
Product Details

263 LT series 2 / 2 direct operated solenoid valves

2 / 2 N/C direct-operated solenoid valves for cryogenic service.
Solenoids with two orifices for heavy-duty systems and pressurised fluids.
Liquid oxygen valves are UV-light tested to check for any hydrocarbons.
Valves are degreased, tested and packed to keep them free from moisture.
Do not require a minimum operating pressure.
Pluggable connectors.

Standards

ISO 4400 - IEC 335

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Operation Direct
Connection 3/8 in Rp Female
Connection Size 3/8in
Default Valve Position NC
Suitable Applications Cryogenic Liquid
Type 2/2
Orifice Diameter 7.1mm
Body Material Brass
Maximum Working Pressure 3 bar
Operating Temperature Range -196 → +90 °C
Minimum Operating Temperature -196°C
Maximum Operating Temperature +90°C
Thread Standard or Connection Type Rp
Maximum Opening Time 25ms
Connection Gender Female
Series 263LT
Flow Factor Kv 0.6m³/h
Maximum Closing Time 25ms
11 Within 5 working day(s) (Global stock)
14 Within 5 working day(s) (Global stock)
Price (ex. GST) Each
$ 433.79
(exc. GST)
$ 498.86
(inc. GST)
units
Per unit
1 +
$433.79
Related Products
Two-way, direct acting solenoid valves, normally closed with ...
Description:
Two-way, direct acting solenoid valves, normally closed with threaded port connection. Brass body. Pressure not required for operation. Compact & lightweightDIN plug connection. Ranging from -10°C to +100°C Can be mounted in any position.
Diaphragm valve for neutral gaseous and liquid fluids. ...
Description:
Diaphragm valve for neutral gaseous and liquid fluids. Suitable for vacuums. Fixed flow direction. Valve operates without minimum pressure differential. Electromagnetic operation. Forced lift.
Diaphragm valves for partially aggressive gaseous and liquid ...
Description:
Diaphragm valves for partially aggressive gaseous and liquid media. Suitable for vacuum. For systems with low or fluctuating pressure conditions. Defined flow direction. Valve works without minimum pressure differential. Electromagnetically actuated. With forced lift. Closing damping. Without tool, interchangeable ...
Parker 2-way solenoid valves are used in a ...
Description:
Parker 2-way solenoid valves are used in a wide variety of applications with or without pressure differential. Ideally suited for air, liquids and gases, these valves are available with a brass or stainless steel body. Compressors. Water dispensing & purification. ...