Burkert Solenoid Valve 93970048, 2 port , NC, 230 V ac, 1-1/4in

  • RS Stock No. 804-2074
  • Mfr. Part No. 93970048
  • Manufacturer Burkert
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

DS6213-EV Series 2/2 Stainless Steel Solenoid valves

Burkerts new range of 2 way normally closed solenoid valves. Manufactured from stainless steel and designed for use with water and inert liquids and gases. A soft mechanical coupling between the main piston and pilot armature aids smooth operation and a precision engineered main body path helps ensure quiet, water hammer free operation.
Suitable for a diverse range of applications including compressed air and vacuum systems, heating and refrigeration, water treatment and swimming pool technology. Compact size to aid installation when space is limited

0-10 bar operating pressure
0.1-4 second response time
Opens without differential pressure
Minimum pressure differential of 0.5 bar for full opening
High flow rate
Sealed coil
IP65 Rating

Note

Due to their internal complexity these valves can only be used with clean neutral media.

Compact solenoid valves suitable for most gas and fluid handling applications. Where practical, valves are shown with a schematic diagram showing the (circuit) function. The diagram is laid out so that the left-hand side of the diagram describes the valves operation when the coil is energised. When the coil is de-energised, the spring (or servo-assist) return controls the valve and is described on the right-hand side of the diagram. The 3 / 2-way designation indicates a valve with three ports and two modes of operation. It is normal practice to refer to 2 / 2-way valves as two ways. The port designations A, B, P, P1, P2 and R are used on the schematic diagrams and are marked on the valve bodies. Valve bodies are marked for a specific circuit function but can often be used for other functions. Reference to the schematic diagrams and technical specifications indicates the appropriate connections and pressure capabilities when an alternative circuit function is required.

Specifications
Attribute Value
Supply Voltage 230 V ac
Number of Ports 2
Operation Pilot
Connection 1-1/4 in G Female
Connection Size 1-1/4in
Default Valve Position NC
Suitable Applications Liquid
Type 2/2
Orifice Diameter 25mm
Body Material Stainless Steel
Maximum Working Pressure 10 bar
Operating Temperature Range 0 → +120 °C
Minimum Operating Temperature 0°C
Maximum Operating Temperature +120°C
Connection Gender Female
Servo Assist Yes
Flow Factor Kv 11m³/h
Thread Standard or Connection Type G
Series 221
On back order for despatch 20/08/2020, delivery within 5 working days from despatch date.
Price (ex. GST) Each
$ 976.02
(exc. GST)
$ 1,122.42
(inc. GST)
units
Per unit
1 +
$976.02
Related Products
Solenoid valves with pivoted armatures which provide high ...
Description:
Solenoid valves with pivoted armatures which provide high pressure operation with aggressive gases and fluids. BSP parallel ports compatible with RS stainless compression fittingsIP65 rated 3-pin DIN connector can be positioned through 360° in 90° increments. Zero head pressure capability. ...
The Burkert 0124 series 1/4in G female solenoid ...
Description:
The Burkert 0124 series 1/4in G female solenoid valve has a supply voltage rating of 230VAC. This 3-port NO/NC position valve is made of PP material for aggressive media. This direct-acting solenoid valve with separating diaphragm has a pivoted armature ...
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin ...
Description:
Solenoid valves with pivoted armatures. Lockable manual over-ride3-pin DIN connector rated to IP65 can be positioned through 360° in 90° increments. Duty cycle intermittent operation 40% 30 min8W nominal coil power. Power consumption 30VA (in-rush), 15 VA/8W (hold) a.c, A ...
Two-way, direct operated, EN161 approved solenoid valves for ...
Description:
Two-way, direct operated, EN161 approved solenoid valves for use on gas pilot and gas burner control, zero bar minimum operating pressure, normally closed, threaded port connection. Pressure not required for operation. Compact & lightweightISO 4400 DIN connection. Class A, group ...