Thermal Interface Pad, Q-Pad II, 2.5W/m·K, 28.96 x 20.57mm 0.152mm

  • RS Stock No. 283-3650
  • Mfr. Part No. QII-0.006-00-122
  • Manufacturer Bergquist
Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): US
Product Details

Q-Pad II insulators

Q-Pad Q2 insulators are made up of a 25 μm aluminium sheet, coated on both sides with a 65 μm thermo-conductive layer.
Thermal conductors.
They overcome problems associated with grease, including contamination of fusion welds and cleaning operations.
Available in dry or self-adhesive models.
They are intended for applications not requiring any electrical insulation.
They prevent deposits of dust often likely to cause short-circuits or heat accumulations.
Zero electrical insulation.
Directly replaces silicone grease.

Specifications
Attribute Value
Dimensions 28.96 x 20.57mm
Thickness 0.152mm
Length 28.96mm
Width 20.57mm
Thermal Conductivity 2.5W/m·K
Material Q-Pad II
Minimum Operating Temperature -60°C
Maximum Operating Temperature +180°C
Hardness Shore A 93
Material Trade Name Q-Pad II
Operating Temperature Range -60 → +180 °C
150 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Pack of 50)
$ 0.978
(exc. GST)
$ 1.125
(inc. GST)
units
Per unit
Per Pack*
50 - 200
$0.978
$48.90
250 - 1200
$0.943
$47.15
1250 - 2450
$0.908
$45.40
2500 - 4950
$0.873
$43.65
5000 +
$0.843
$42.15
*price indicative
Related Products
This solid state relay thermal pad is self ...
Description:
This solid state relay thermal pad is self adhesive on one side and made of a Silicon resin / glass fiber. The KTP –(A) is suitable for KSI and KSJ single phase relays. The KPT-1(A) is suitable for KMS, KMT, ...
The Intelligent LED solution thermal gap pad is ...
Description:
The Intelligent LED solution thermal gap pad is specially designed for LED applications to allow better thermal management. This range of insulated metal substrates are known as metal clad printed circuit boards. This is made of metal material. It is ...
High-performance insulators, which combine Kapton MT type polyamide ...
Description:
High-performance insulators, which combine Kapton MT type polyamide film with the boron nitride reinforced silicon elastomer.Electrical insulators and thermal conductors.These replace ceramic insulators used when mechanical resistance is required.Overcomes the risks of breaking.Very good electrical insulation ...
Long term stability. Electrical insulation. Excellent compressibility. ApplicationsBattery ...
Description:
Long term stability. Electrical insulation. Excellent compressibility. ApplicationsBattery packs, battery housings, power supplies, power cable connectors. Automotive ECU (electronic control units), power supplies, microprocessors, displays and consumer electronics.