Thermal Interface Pad, Graphite, 240 W/m·K, 5 W/m·K 0.13mm, Self-Adhesive

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): GB
Product Details

ILS Thermal Interface Materials (TIM) - LED Stars

The ILA-TIM-STAR series, from Intelligent LED Solutions, are a range of thermal heat pads designed specifically for LED Star arrays. The ILA-TIM-STAR thermal gap pads are from ILS' Thermal Interface Materials (TIM) family. They are available in non-adhesive or single/double sided adhesive options.

"Features of the ILA-TIM-STAR single-sided and non-adhesive:
Colour: pewter
0.13mm thick
Temperature range: -240°C to +300°C

Features of the ILA-TIM-STAR double-sided:
Colour: cream
0.16mm thick
Temperature range: -240°C to +300°C"

Thermal Interface Materials, Intelligent LED Solutions

The ILA-TIM-XXXX-YY series of high-performance, cost effective thermal Interface Material (TIM), from Intelligent LED Solutions, is designed for use with their standard LED array products (such as: 773-3482). The Thermal Interface material fills air pockets between the PCB and the heat sink surfaces, forming a continuous layer to improve the transfer of heat away from the LED.
Intelligent LED Solutions offers three versions of Thermal Interface Material: Double sided adhesive (suffix -2A), single sided adhesive (suffix -1A) and no adhesive (suffix -0A).

Specifications
Attribute Value
Thickness 0.13mm
Thermal Conductivity 5 W/m·K, 240 W/m·K
Material Graphite
Self-Adhesive Yes
Minimum Operating Temperature -240°C
Maximum Operating Temperature +300°C
Hardness Shore A 85
Material Trade Name TIM
Operating Temperature Range -240 → +300 °C
592 In stock for delivery within 5 working day(s)
Price (ex. GST) Each (In a Pack of 8)
$ 2.20
(exc. GST)
$ 2.53
(inc. GST)
units
Per unit
Per Pack*
8 +
$2.20
$17.60
*price indicative
Related Products
Phase change thermal Interface material with aluminium carrier ...
Description:
Phase change thermal Interface material with aluminium carrier intended for use between a computer processor and a heat sink.,Adhesive on one side,Requires pressure of assembly to cause flow.,Applications: ,Computer and peripherals,Power conversion,High performance computer processor,Power semiconductors ,Power ...
T-flex™ 300 is a silicone gel combined with ...
Description:
T-flex™ 300 is a silicone gel combined with a ceramic powder to offer a unique combination of compliancy, thermal resistance and price. At pressures of 50 psi, it deflects over 50% the original thickness. This high rate of compliancy allows ...
With hole except model SL018AL20, which is designed ...
Description:
With hole except model SL018AL20, which is designed for clip mounting and not screw mounting.Harder than all metal alloys, aluminium ceramic is an exceptional material allowing extraordinary performance in a very wide field of applications.Electrical insulators and thermal conductors.High resistance ...
High-performance insulators, which combine Kapton MT type polyamide ...
Description:
High-performance insulators, which combine Kapton MT type polyamide film with the boron nitride reinforced silicon elastomer.Electrical insulators and thermal conductors.These replace ceramic insulators used when mechanical resistance is required.Overcomes the risks of breaking.Very good electrical insulation ...