Mannesmann Kienzle Vibration Sensor -40°C → +85°C, Dimensions 20 x 5 x 20 mm

Technical data sheets
Legislation and Compliance
RoHS Certificate of Compliance
COO (Country of Origin): DE
Product Details

Acceleration sensors for difficult environmental conditions — BG2166

The acceleration sensors are manufactured on the basis of MEMS-based differential capacitors and are equally suitable for measuring acceleration, vibration and inclination. The sensor is characterised by a long service life, minimal drifts and great long-term stability. The special housing material makes it resistant to many environmental influences and chemicals.

Acceleration sensors - type 2166

These transmitters are to be used where accelerations or measurement parameters based on these are to be measured, such as inclination, rotation movements, translational movements and line movements comprising these. The acceleration transmitter consists of the actual sensor element made of a micro-mechanically manufactured differential capacitor. This element is characterised by a long service life, minimal drifts and great long-term stability. As a result of operating acceleration forces, the two capacities of the capacitor are changed in opposition to each other. This is recorded in an electronic circuit and assessed appropriately.

Type BS2166 ±2 g BG2166 ±2 g BG2166 ±50 g
Measurement range ±2 g ±2 g ±50 g
Shock resistance ≥1000 g ≥1000 g ≥1000 g
Frequency range
(-3 dB)
0 → 20 Hz 0 → 20 Hz 0 → 100 Hz
Output signal Pulse width modulated,
Base frequency approx. 20 kHz
0.5 V - 4.5 V, ratiometric 0.5 V - 4.5 V, ratiometric
Resolution ≤1 mg ≤0.001 g ≤0.01 g
Temp. range -40 °C → +85 °C -40 °C → +85 °C -40 °C → +85 °C
Offset 3% 6% 6%
TC sensi-
tivity
≤ ±1% ≤ ±1% ≤ ±1%
Hysteresis 0 g 0 g 0 g
Non-linearity ±2% ±2% ±2%
Voltage rating 3 to 5.5 V (regulated) 5 V ±10% 5 V ±10%
Power consumption approx. 1 mA ≤7 mA ≤7 mA
Zero signal Pulse ratio 1:1 0.5 *Ub 0.5 *Ub
Max. Output
load

    -
1 KΩ parallel to 100 nF 1 KΩ parallel to 100 nF
Sensitivity
    -
1 V/g 40 mV/g
Protected against reverse polarity
    -
Given to Ub max. Given to Ub max.
Protection system
    -
IP67 IP76
Body Metal housing Grivory GV-5H black Grivory GV-5H black
Width 20 mm 53 mm 53 mm
Height 5 mm ( 10 mm with pins) 18.6 mm 18.6 mm
Length 20 mm 80 mm 80 mm
Mounting PB THT 2 x M4 2 x M4
Specifications
Attribute Value
Minimum Operating Temperature -40°C
Maximum Operating Temperature +85°C
Dimensions 20 x 5 x 20 mm
Discontinued product
Related Products
Diecast metal housingSelectable release delay 3,5,10 or 20msConnection ...
Description:
Diecast metal housingSelectable release delay 3,5,10 or 20msConnection can be rotated through 90°Dimensions (mm): 30x56x80 WDH (H is excluding connection) Analogue output 0.5 to 10mA, 800 ΩSupply Voltage 24V ± 20%.
Ifm electronic VTV series vibration transmitters monitor machinery ...
Description:
Ifm electronic VTV series vibration transmitters monitor machinery and equipment according to ISO 10816. The robust design, high IP Rating and high temperature rating are suitable for use in harsh environments. The VTV sensors measure the true RMS velocity of ...
Normally open contact acceleration switches used to detect ...
Description:
Normally open contact acceleration switches used to detect sudden changes in velocitySteel gold plated caseChoice of activation levels: 2G (455-3665), 5G (289-7935), 10G (455-3643)Dimensions: Length 18mm (inc. pins) Body Dia. 4.6mm.
Fully-electric vibration sensorThis innovative Seismic sensor detects break-in ...
Description:
Fully-electric vibration sensorThis innovative Seismic sensor detects break-in attempts through prying, penetration, impact etc. using typical impact sound signalsPatented frequency analysis detects the difference between simple knocking, external vibrations and similar frequencies that typically occur during a ...