John Drummond DRUMTL10 Voltage Indicator CAT III 1000 V, CAT IV 600 V

Technical data sheets
Legislation and Compliance
RoHS Status: Exempt
COO (Country of Origin): PH
Product Details

Drummond Test Lamps MTL10

Bright LED indication of voltage between 50V and 500V AC/DC
Four distinct bands of illumination above 50, 100, 200 and 400V AC/DC with a 360o viewing angle even in bright sunlight
Identifies potentially lethal voltages at 50V and distinguishes between 110V, 230V and phase to phase voltages in 3 phase systems
Finger shields and insulated probe tips with only 4mm of exposed metal
Double insulated cable with white inner insulation gives a clear warning of abrasion and is heat and oil resistant
Meets the recommendations of the UK Health and Safety Executive in their guidance notes on the electrician’s test lamp (GS38)
Complies with BS EN 61243-3 and BS EN 61010. CAT IV 600V, CAT III 1000V
No batteries required

Caution

Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit.

Supplied with

Carry case, right angled probe tip, two straight tips and instructions

Caution

Test lamps should be proved safe before and after use, by testing on a known live circuit, using the continuity tester, or through the Martindale PD690 proving unit

Mains Voltage Indicators - Contact

Specifications
Attribute Value
Maximum Voltage 500V ac/dc
Safety Category CAT III 1000 V, CAT IV 600 V
Display Type LED
IP Rating IP67
Power Source Mains
Dimensions 213 x 112 x 72mm
Weight 320g
Height 72mm
Length 213mm
Maximum Operating Temperature +55°C
Width 112mm
Model Number p DRUMTL10
Safety Category Voltage 600 V, 1000 V
Minimum Operating Temperature -10°C
Safety Category Level CAT III, CAT IV
13 In stock for delivery within 5 working day(s)
Price (ex. GST) Each
$ 117.32
(exc. GST)
$ 134.92
(inc. GST)
units
Per unit
1 +
$117.32
Related Products
The FLIR clamp meter has true RMS meters ...
Description:
The FLIR clamp meter has true RMS meters which are designed to measure AC of maximum 400A. The CM42 is an AC clamp meter, which features Accu-Tip™ technology due to which Average measurements on the smaller gauge wire is made ...
The U1190 Series clamp meters are built to ...
Description:
The U1190 Series clamp meters are built to perform in the environments you work. Ergonomically built, the U1190 Series clamp meters fit comfortably in the palm of your hand and allow you to select measurement functions with just a simple ...
Safely detect the presence of AC voltage in ...
Description:
Safely detect the presence of AC voltage in cables, wires, wall sockets fuses and junction boxes with the RS PRO VP-4. Ergonomically designed for comfort, it features a built in torch for confined spaces, a clip for pockets or tool ...
The Non-Contact Volt. Stick® is a tester for ...
Description:
The Non-Contact Volt. Stick® is a tester for safely checking the presence of an AC voltage without making any disconnections in cables, wall sockets, fuses, circuit breakers, junction boxes etc. No current flow is needed for correct detection. Apply the ...