IEC Connectors

IEC Connectors are used as power couplers for electrical appliances. IEC refers to the set of standards from the International Electrotechnical Commission, ensuring that the power cords for appliances conform to a standardized set of safety requirements for appliances not exceeding a 250 V ac voltage or 16 A rated current.
For everything to domestic kitchen equipment to computer hardware in office environments, the IEC connector is available in different sizes and shapes to accommodate the current, temperature and earthing requirements of different appliances.


IEC Types:



  • C1/C2- Used for small electrical appliances such as electric trimmers or shavers.

  • C5/C6- Known as a cloverleaf, this power connector is used in smaller electrical appliances such as projectors.

  • C7/C8- The figure-eight connector is commonly used in personal stereo systems and some older laptop models.

  • C13/C14- This connector is used for larger electrical appliances, such as kitchen appliances, instrumentation amplifiers and computer hard drives.

  • C15/C16- This connector is often referred to as a kettle lead due to its use in powering electric kettles. They are well suited to this task due to their designation as a ’hot condition’ coupler and having a high-temperature rating

  • C15A/C16A- Is similar to the C15 and C16, but is rated for a higher temperature.

  • C17/C18- Is an unearthed power connector that is used in audio applications when audio quality is a concern.

  • C19/C20- Is a power connector for high current applications, such as uninterruptible power supplies or power distribution units.


...
Read more Read less

Filters

Viewing 1 - 20 of 301 products
Results per page
Description Price IEC Connector Type Mounting Type Gender Current Rating Body Orientation Termination Method Switch Type Number of Fuses Voltage Rating Rewireable Fuse Size Maximum Cable Diameter Shuttered Series
RS Stock No. 488-191
BrandRS PRO
$7.86
Each
units
C14 Panel Mount Male 10.0A Straight Solder, Spade None - 250 V ac - - - - -
RS Stock No. 811-7207
BrandRS PRO
$1.81
Each
units
C14 Panel Mount Male 10.0 A, 15.0A Straight Solder None None 250.0 V - - - - -
RS Stock No. 776-9135
BrandRS PRO
$1.81
Each
units
C20 Panel Mount Male 20.0A Straight Solder/Faston None None 250 V ac - - - - -
RS Stock No. 811-7226
BrandRS PRO
$4.37
Each
units
C14 Snap-In Male 6.0A Straight Solder/Faston 2 Pole 1 250.0 V - 5 x 20mm - - -
RS Stock No. 811-7193
BrandRS PRO
$3.70
Each
units
C13 Panel Mount Female 10.0 A, 15.0A Straight Solder/Faston None None 250.0 V - - - - -
RS Stock No. 811-7213
BrandRS PRO
$4.88
Each
units
C14 Panel Mount Male 10.0A Straight Solder/Faston None 1 250.0 V - 5 x 20mm - - -
RS Stock No. 811-7235
BrandRS PRO
$5.09
Each
units
C14 Panel Mount Male 10.0A Straight Solder/Faston None 2 250.0 V - 5 x 20mm - - -
RS Stock No. 811-7216
BrandRS PRO
$5.91
Each
units
C14 Snap-In Male 6.0A Straight Solder/Faston 2 Pole 1 250.0 V - 5 x 20mm - - -
RS Stock No. 811-7204
BrandRS PRO
$3.72
Each
units
C14 Snap-In Male 10.0A Straight Solder/Faston None 1 250.0 V - 5 x 20mm - - -
RS Stock No. 811-7222
BrandRS PRO
$4.37
Each
units
C14 Snap-In Male 6.0A Straight Solder/Faston 2 Pole 1 250.0 V - 5 x 20mm - - -
RS Stock No. 811-7210
BrandRS PRO
$6.02
Each
units
C14 Snap-In Male 6.0A Straight Solder/Faston 2 Pole 1 250.0 V - 5 x 20mm - - -
RS Stock No. 811-7238
BrandRS PRO
$4.73
Each
units
C20 Snap-In Male 16.0 A, 20.0A Straight Solder/Faston None None 250.0 V - - - - -
RS Stock No. 776-9144
BrandRS PRO
$2.68
Each
units
C19 Panel Mount Female 20.0A Straight Solder/Faston None None 250 V ac - - - - -
RS Stock No. 811-7229
BrandRS PRO
$4.81
Each
units
C14 Snap-In Male 6.0A Straight Solder/Faston 2 Pole 1 250.0 V - 5 x 20mm - - -
RS Stock No. 776-9131
BrandRS PRO
$2.37
Each
units
C14 Snap-In Male 10.0 A, 15.0A Straight Solder None None 250 V ac - - - - -
RS Stock No. 811-7200
BrandRS PRO
$2.34
Each
units
C14 Snap-In Male 10.0 A, 15.0A Right Angle Solder None None 250.0 V - - - - -
RS Stock No. 811-7197
BrandRS PRO
$6.64
Each
units
C13 Snap-In Female 10.0 A, 20.0A Straight Solder/Faston None None 250.0 V - - - - -
RS Stock No. 896-2136
BrandRS PRO
$1.982
Each (In a Pack of 5)
units
- Snap-In Male 20.0A Straight Faston - - 250.0 V - - - - -
RS Stock No. 776-9138
BrandRS PRO
$3.34
Each
units
C13 Snap-In Female 15.0A Straight Solder/Faston None None 250 V ac - - - - -
New
RS Stock No. 203-5562
BrandRS PRO
$2.16
Each (In a Bag of 5)
units
C14 Panel Mount Male 10A Straight Snap-In - - 250 V - - - - -
Related Products
IEC plug C14 variant, snap-in and screw, panel ...
Description:
IEC plug C14 variant, snap-in and screw, panel mount inlet connectors with nylon-6 body and tin plated copper alloy mating contacts and faston terminals, rated at 10A (VDE) and 15A (UL,CSA), 250Vac. These C14 connectors offer a hardwearing durable solution ...
A screw on panel mount IEC appliance inlet ...
Description:
A screw on panel mount IEC appliance inlet for PCB mounting. A flange design with through holes without an additional terminal. Screw on mouting from rear side. Jet black housing. Suitable for appliances with protection class 1 according to IEC ...
The Schurter 6765 series of power entry modules ...
Description:
The Schurter 6765 series of power entry modules are designed for use in a variety of applications and are available with a choice of connectivity options. Features:Panel Mount: Screw-on Version from Front or Rear Side. Solder Terminals or Quick Connect ...
From Schurter, these C22 very hot condition appliance ...
Description:
From Schurter, these C22 very hot condition appliance inlet connectors are available in snap fit and screw mount versions, and have a durable thermoplastic construction for temperatures up to 155 degrees C, protection class 1 (IEC 61140).These RoSH compliant C22 ...