Punches

Punch sets are ideal for punching neat holes in a variety of materials. Whether in textiles, woodworking or metalworking, a set of punch tools allows the operator to drive objects into the material, or form an impression on a workpiece. Sharp at one end, and hardened and flat at the other, a punch can be used with a hammer to achieve the desired results.


The RS range of punch sets includes several different types to suit your needs, from our own brand RS PRO and also well-known brands such as Bahco, Stanley, Gedore and Facom to name a few:


  • Centre Punch- A common type of punch with a semi blunted end. This is typically used to mark a centre for drilling in a piece. By creating a small recess for the drill bit to rest in, the drill is assured a greater chance of staying on course.
  • Drift Punch - Sometimes referred to as a pokey, this punching tool is often used for enlarging previously made holes. It can also be used for aligning holes prior to bolting.
  • Parallel Pin Punch - A parallel pin punch is often employed to remove pins from mechanical assemblies. When a pin is too tight to remove by hand, the correctly sized parallel pin punch can be employed to drive it loose.
  • Spring Pin Punch - Spring pin punches are used for removing roll pins, a type of mechanical fastener. For this reason, spring pin punches are also called roll pin punches and are specially shaped to remove roll pins without causing damage or becoming jammed.
  • Wad Punch - Have interchangeable heads and are used to cut accurate circles into textile materials. They can even be used on thin metal to make washers.
  • Anti-Vibration - With a shock-absorbing rubber handle, this punch not only offers the user maximum safety and comfort but also prevents clipping.

...
Read more Read less

Filters

Viewing 61 - 80 of 122 products
Results per page
Description Price Overall Length Shank Diameter Number of Pieces Point Angle Punch Type
RS Stock No. 188-4038
Mfr. Part No.293A.4
BrandFacom
$53.31
Each
units
- 4.0 mm 1 - -
RS Stock No. 473-0676
BrandRS PRO
$13.50
Each
units
35 mm 4 mm 1 - Replaceable
RS Stock No. 494-086
Mfr. Part No.4-18-226
BrandStanley
$58.82
Each
units
152 mm 1.5 → 3 mm 6 - -
RS Stock No. 521-5364
BrandRS PRO
$11.14
Each
units
35 mm 3.5 mm 1 - Replaceable
RS Stock No. 547-638
Mfr. Part No.351BRS
BrandEclipse
$12.49
Each
units
100 mm 4 mm 1 90° Fine Machine Point
RS Stock No. 124-6125
Mfr. Part No.TAH3755BM-4
BrandBahco
$32.21
Each
units
- 4.0 mm 1 - Parallel Pin
RS Stock No. 784-5936
Mfr. Part No.251A.2
BrandFacom
$22.31
Each
units
83 mm 1.9 mm 1 - Drift
RS Stock No. 146-8712
Mfr. Part No.249.G4SLS
BrandFacom
$82.36
Each
units
- 4.0 mm 1 - Drift
RS Stock No. 188-3774
Mfr. Part No.255.G2.5
BrandFacom
$18.04
Each
units
- 2.5 mm 1 - Centre
RS Stock No. 191-4096
Mfr. Part No.293A.3
BrandFacom
$50.44
Each
units
- - 1 - -
RS Stock No. 191-4068
Mfr. Part No.245A.M4
BrandFacom
$33.90
Each
units
- - 1 - -
RS Stock No. 876-4884
Mfr. Part No.249.G4
BrandFacom
$20.48
Each
units
- 4.0 mm 1 - -
RS Stock No. 146-8715
Mfr. Part No.249.G8SLS
BrandFacom
$81.27
Each
units
- 8.0 mm 1 - Drift
RS Stock No. 191-4047
Mfr. Part No.248.3
BrandFacom
$16.53
Each
units
- - - - -
RS Stock No. 182-9787
BrandRS PRO
$9.05
Each
units
- 4.0 mm 1 - Centre
RS Stock No. 772-4400
Mfr. Part No.106 D
BrandGedore
$105.54
Each
units
150 mm 10 mm 6 - -
RS Stock No. 188-3765
Mfr. Part No.249.4
BrandFacom
$13.95
Each
units
- - - - -
RS Stock No. 124-6122
Mfr. Part No.TAH3734BM-5
BrandBahco
$36.85
Each
units
- 5.0 mm 1 - Parallel Pin
RS Stock No. 733-744
Mfr. Part No.351ARS
BrandEclipse
$14.92
Each
units
100 mm 3.2 mm 1 90° Fine Machine Point
RS Stock No. 545-389
Mfr. Part No.E171RS
BrandEclipse
$55.27
Each
units
120 mm 4 mm 1 - Automatic
Related Products
Each punch is hardened, tempered and ground with ...
Description:
Each punch is hardened, tempered and ground with a chemically blackened knurled body. 6 punches for inserting and extracting spring tension pins.Raised pilot end for locating into pins. Suitable for spiral wrapped spring tension pins. Made from tool steel with ...
Introducing the centre punch from our trusted and ...
Description:
Introducing the centre punch from our trusted and reliable own brand RS PRO, a durable hand tool designed to safely and efficiently pierce or mark a range of heavy-duty material such as metal without damaging the surrounding material. RS PRO ...
The Teng Tools PPS06 series is a 6 ...
Description:
The Teng Tools PPS06 series is a 6 piece parallel pin punch set. It has special tempered steel construction with hardened point for longer life. Overall length 150mm with hexagon grip and rounded shaft area. Supplied with a handy storage ...
Centre punches made from chrome-vanadium air-hardened steel. Multi-coating ...
Description:
Centre punches made from chrome-vanadium air-hardened steel. Multi-coating of impact head virtually rules out chipping and swelling. Polished pin. Octagonal grip shank, painted gold.