Bearing Pullers

When compounds that are held together by their own frictional forces need to be separated, you will need to reach for a set of pullers or separators in order to pull them apart. At RS Components, we have a varied range of reliable pullers, separators and extraction tools, as well as insertion tools and puller accessories.


What types of Pullers are there?


There are several types of pullers available, including mechanical pullers, bearing pullers, hydraulic pullers, strong back pullers, and heavy-duty jaw pullers, all of which you can find here with RS Components.


Mechanical pullers are used to replace the bearing, pulley couplings or other parts that fit together in a similarly close fashion without having to dismantle machinery or remove the running shaft. There are three-arm or two-arm versions, with three arms providing better load distribution and a concentric pulling action and two-arms suitable for confined spaces.


Bearing pullers are specifically-designed tools for removing or installing bearings from rotating machine shafts or from blind bearing holes. Dependent on the size of the puller, the application can vary dramatically, ranging from the transmission to complicated industry machinery.


Hydraulic pullers are designed to pull any bearing, belt pulley, gear, round wheel or other tightened part used within the machinery industry. One of the main features of using a hydraulic version is that the job of removing or dismounting a bearing is much simpler, faster and safer.


Strong back pullers are used for easy insertion between bearing and shoulders on a shaft, featuring a spring-operated centre point and a safety valve, minimising puller overload.


Heavy-duty jaw pullers are considered the most versatile, they offer easy and effective dismount of bearings. They offer minimal damage to a bearing, through the use of a jaw, the whole operation is of pulling a bearing is easy and safe. Jaws are commonly used in industrial and commercial environments.


Internal bearing pullers can be used for removing grooved ball bearings efficiently from shafts and cases without dismounting a bearing. This is known as a user-friendly option because some gear puller sets feature an elastic retaining ring which helps keep the puller arm in position.


...
Read more Read less

Filters

Viewing 1 - 20 of 90 products
Results per page
Description Price Capacity Puller Type Hydraulic Force Operation Number of Pieces
RS Stock No. 349-7249
BrandRS PRO
$187.41
Each
units
75 → 105 mm Bearing Puller 10.0t Hydraulic 8
RS Stock No. 349-7261
BrandRS PRO
$375.00
Each
units
75 → 105 mm Bearing Puller 8.0t Hydraulic 25
RS Stock No. 349-7227
BrandRS PRO
$202.35
Each
units
50 → 250 mm Bearing Puller 10.0t Hydraulic -
RS Stock No. 434-2572
BrandRS PRO
$133.85
Each
units
19 → 45 mm Bearing Puller - Lever Press 2
RS Stock No. 434-2566
BrandRS PRO
$107.78
Each
units
50 mm Bearing Puller - Hand 2
RS Stock No. 349-7306
BrandRS PRO
$70.87
Each
units
150 mm Bearing Puller - Lever Press -
RS Stock No. 349-7233
BrandRS PRO
$101.24
Each
units
9/32 → 3 in Bearing Puller - Gear -
RS Stock No. 349-7312
BrandRS PRO
$64.37
Each
units
200 mm Bearing Puller - Lever Press -
RS Stock No. 349-7255
BrandRS PRO
$246.48
Each
units
105 → 152 mm Bearing Puller 10.0t Hydraulic -
RS Stock No. 349-7299
BrandRS PRO
$39.93
Each
units
100 mm Bearing Puller - Lever Press -
RS Stock No. 732-4735
Mfr. Part No.TMMK 10-35
BrandSKF
$2,092.63
Each
units
10 → 35 mm Bearing Puller - Hand -
RS Stock No. 237-776
Mfr. Part No.GEDORE 9.00/3
BrandGedore
$392.88
1 Kit
Kit(s)
40 → 120 Spread mm Bearing Puller 2.0t Lever Press 3
RS Stock No. 737-2826
Mfr. Part No.71161001
BrandSTAHLWILLE
$152.67
Each
units
- Bearing Puller - Gear -
RS Stock No. 189-538
Mfr. Part No.TMIP 7-28
BrandSKF
$1,026.73
1 Kit
Kit(s)
10 → 12 mm, 15 → 17 mm, 20 → 28 mm, 7 → 9 mm Bearing Puller - Hand 6
RS Stock No. 737-2822
Mfr. Part No.71160010
BrandSTAHLWILLE
$152.26
Each
units
12 mm Bearing Puller - Gear -
RS Stock No. 845-8359
Mfr. Part No.TMMP 2X170
BrandSKF
$265.54
Each
units
170.0 mm Bearing Puller 2.0t Hand -
RS Stock No. 847-8230
Mfr. Part No.1656937
BrandGedore
$98.00
Each
units
80.0 mm Bearing Puller - Lever Press -
RS Stock No. 669-8206
Mfr. Part No.U.232J2PB
BrandFacom
$387.35
Each
units
30 → 60 mm, 60 → 122 mm Bearing Puller - Gear 2
RS Stock No. 124-8442
Mfr. Part No.TMBS150E
BrandSKF
$1,600.51
Each
units
- Bearing Puller - Hand 14
RS Stock No. 237-798
Mfr. Part No.GEDORE 9.00/1
BrandGedore
$433.36
1 Kit
Kit(s)
- Bearing Puller - Gear 3
Related Products
A 3 piece set designed for the safe ...
Description:
A 3 piece set designed for the safe removal of tight fitting ball bearings, bearing races, bushings and shaft seals. The internal extractor is inserted into the bearing and the spindle screwed in. The turned out shoulders will press outwards ...
Bolt Grip fastener removers from Irwin. Designed with ...
Description:
Bolt Grip fastener removers from Irwin. Designed with a reverse spiral flute which securely grips and removes stubborn nuts and bolts. Suitable for use with a hand ratchet 3/8 in square drive and has hexagon flats for use with a ...
The SKF TMBS E series of back pullers ...
Description:
The SKF TMBS E series of back pullers are easily inserted between the bearing and shoulder on the shaft. They have a spring loaded centre point allowing easier puller centring and a safety valve minimising puller overload. • TMBS 100E ...
The TMHS 100 hydraulic spindle from SKF generates ...
Description:
The TMHS 100 hydraulic spindle from SKF generates a high pulling force with only a small amount of effort. Unlike standard mechanical spindles, they can dismount bearings in in a reduced time. The cylinder, pump and spindle are fully integrated ...