Threading Tap & Die Sets

Taps and dies are used to create screw threads, both internal and external. Most are cutting tools, but some are forming tools. Taps are used to cut the threads of the female portion, such as a nut, for example, and this process is called tapping. On the other hand, a die is used to cut or form the male portion, such as the corresponding bolt, and this is called threading.


Both tools can also be used to clean dirt and debris from their respective products, which is called chasing. However, taps and dies will generally remove some material during use, and so specific tools have been created for the specific purpose of cleaning – these are called chasers. These are made of softer materials so that they do not remove more material from the threads.


How do they work?


Using a simple method of securing the rod of the chosen screw, bolt, or pipe in a vice, apply a little cutting paste before placing the die onto the rod and rotating clockwise with a die handle. Each full turn cuts a new thread onto the rod.


When would I use it?


Tap and die sets are typically used in the electrical & industrial sectors, as well as servicing and automotive workshops.


...
Read more Read less

Filters

Viewing 1 - 20 of 31 products
Results per page
Description Price Maximum Die Size Minimum Tap Size Maximum Tap Size Minimum Die Size Number of Pieces Set Contents Material
RS Stock No. 300-7458
BrandRS PRO
$1,500.08
1 Set
Set(s)
M20 M6 M20 M6 29 Taps: M6; M7; M8; M9; M10; M11; M12; M14; M16; M18; M20; Dies: M6; M7; M8; M9; M10; M11; M12; M14; M16; M18; M20; Tap Wrench: #1; #2 (x3); Diestock HSS
RS Stock No. 427-925
BrandRS PRO
$323.10
Each
units
3/16 in BSW 1/2 in BSW 3/16 in BSW 1/2 in BSW 24 3/16; 1/4; 5/16; 3/8; 7/16; 1/2 in BSW Taper Taps; 3/16; 1/4; 5/16; 3/8; 7/16; 1/2 in BSW Bottom Taps; 3/16(O/D 13/16 in x 1/4); 1/4(O/D 1 in x 3/8); 5/16(O/D 1 in x 3/8); 3/8(O/D 15/16 in x 7/16); 7/16(O/D 15/16 in x 7/16); 1/2(O/D 1 1/2 in x 1/2) Round Split Dies; 13/16; 1; 15/16; 1 1/2(in) Die Holders; #5 (M5-M12; 3/16 in → 1/2 in) Tap Wrench; Screwdriver HSS
RS Stock No. 205-3242
BrandRS PRO
$629.85
Each
units
1.25 in 0.375 1.25 0.375 in 7 Blank -
RS Stock No. 668-1125
BrandRS PRO
$211.13
1 Set
Set(s)
M12 M3 M12 M3 32 Hand Taps: M3 to M12 (x21); Round Dies: M3 to M12 (x7); Tap Wrench: 1 1/2 in; Die Holder: 25x9 mm; Pitch Gauge; Screwdriver HSS
RS Stock No. 668-1129
BrandRS PRO
$638.03
1 Set
Set(s)
M20 M3 M20 M3 54 Hand Taps: M3 to M20 (x33); Round Dies: M3 to M20 (x11); Die Holder: #1; #2; #3; #4; #5; #6 (x6); Tap Wrench: #1; #3 (x2); Pitch Gauge; Screwdriver HSS
RS Stock No. 668-1138
BrandRS PRO
$395.25
1 Set
Set(s)
M12 M3 M12 M3 32 Taps: M3; M4; M5; M6; M8; M10; M12 (x3); Round Dies (x7): M3; M4; M5; M6; M8; M10; M12(25 x 9 mm); Tap Wrench: #1 1/2; Die Holder: 25 x 9 mm; Screwdriver Carbon Steel
RS Stock No. 427-913
BrandRS PRO
$440.66
Each
units
M6 M2 M6 M2 25 M2; M2.5; M3; M3.5; M4; M5; M6 Taper Taps; M2; M2.5; M3; M3.5; M4; M5; M6 Bottom Taps; M2(O/D 5/8 inx3/16); M2.5(O/D 5/8 inx3/16); M3(O/D 13/16 inx1/4); M3.5(O/D 13/16 inx1/4); M4(O/D 13/16 inx1/4); M5(O/D 13/16 inx1/4); M6(O/D 13/16 inx1/4) Round Split Dies; 5/8 x 13/16 in Die Holders; #0 (M1 → M6) Tap Wrench; Screwdriver HSS
RS Stock No. 264-8345
BrandRS PRO
$212.36
1 Set
Set(s)
M20 M25 M20 M25 5 Blank HSS
RS Stock No. 427-919
BrandRS PRO
$708.59
Each
units
M12 M6 M12 M6 21 M6; M8; M10; M11; M12 Taper Taps; M6; M8; M10; M11; M12 Bottom Taps; M6 (O/D 13/16 in x 1/4); M8 (O/D 1 in x 3/8); M10 (O/D 15/16 in x 7/16); M11(O/D 15/16 in x 7/16); M12(O/D 1 1/2 in x 1/2) Round Split Dies; 13/16; 15/16; 1 1/2 in Die Holders; #5 (M5 → M12; 3/16 in → 1/2 in) Tap Wrench; Screwdriver HSS
RS Stock No. 668-0775
BrandRS PRO
$130.99
1 Set
Set(s)
M12 M3 M12 M3 8 Blank -
RS Stock No. 300-7509
BrandRS PRO
$1,013.89
1 Set
Set(s)
3/4 in UNF 1/4 in UNF 3/4 in UNF 1/4 in UNF 25 Taps: 1/4; 5/16; 3/8; 7/16; 1/2; 5/8; 3/4 in UNF; Dies: 1/4; 5/16; 3/8; 7/16; 1/2; 5/8; 3/4 in UNF; Tap Wrench: #1; #2; #3; Diestock: 1 x 1 1/2 in UNF HSS
RS Stock No. 300-7436
BrandRS PRO
$665.39
1 Set
Set(s)
M10 M3 M10 M3 20 Taps: M3; M4; M5; M6; M7; M8; M9; M10; Dies: M3; M4; M5; M6; M7; M8; M9; M10; Tap Wrench: #1 (x2); Diestock: 13/16 to 1; T Tap Wrench: #1 HSS
RS Stock No. 300-7492
BrandRS PRO
$637.23
1 Set
Set(s)
1/2 in UNF 1/4 in UNF 1/2 in UNF 1/4 in UNF 14 Taps: 1/4; 5/16; 3/8; 7/16; 1/2 in UNF; Dies: 1/4; 5/16; 3/8; 7/16; 1/2 in UNF; Tap Wrench: #1 (x2); Diestock: 1 to 1 5/16 in UNF; T Tap Wrench: #1 HSS
RS Stock No. 300-7442
BrandRS PRO
$719.05
1 Set
Set(s)
M12 M3 M12 M3 18 Taps: M3; M4; M5; M6; M8; M10; M12; Dies: M3; M4; M5; M6; M8; M10; M12; Tap Wrench: #1 (x2); Diestock; T Tap Wrench: #1 HSS
RS Stock No. 300-7464
BrandRS PRO
$578.59
1 Set
Set(s)
1/2 in UNC 1/4 in UNC 1/2 in UNC 1/4 in UNC 14 Taps: 1/4; 5/16; 3/8; 7/16; 1/2 in UNC; Dies: 1/4; 5/16; 3/8; 7/16; 1/2 in UNC; Tap Wrench: #1 (x2); Diestock: 1 to 1 5/16 in UNC; T Tap Wrench: #1 HSS
RS Stock No. 300-7470
BrandRS PRO
$1,037.14
1 Set
Set(s)
3/4 in UNC 1/4 in UNC 3/4 in UNC 1/4 in UNC 21 Taps: 1/4; 5/16; 3/8; 7/16; 1/2; 5/8; 3/4 in UNC; Dies: 1/4; 5/16; 3/8; 7/16; 1/2; 5/8; 3/4 in UNC; Tap Wrench: #1; #2 (x3); Diestock: 1 to 1 1/2 in UNC HSS
RS Stock No. 300-9735
BrandRS PRO
$367.79
1 Set
Set(s)
M6 M2 M6 M2 12 Taps: M2; M3; M4; M5; M6; Dies: M2; M3; M4; M5; M6; Tap Wrench: #0; Diestock: 13/16 in HSS
RS Stock No. 364-3723
BrandRS PRO
$250.56
1 Set
Set(s)
M12 M3 M12 M3 12 Blank -
RS Stock No. 612-2718
Mfr. Part No.3886
$376.90
1 Set
Set(s)
12 mm 3 mm 12 mm 3 mm 40 Taps (x17); Dies (x17); Small Tap Adapter; Medium Tap Adapter; Die Adapter; Sliding T for Adapters; Tap and Die Ratcheting T Wrench; Thread gauge; #5 Screwdriver Carbon Steel
RS Stock No. 612-2702
Mfr. Part No.3880
BrandGearWrench
$281.75
1 Set
Set(s)
- - - - - - Carbon Steel
Related Products
Introducing the professional T-handle Tap Wrench from Facom. ...
Description:
Introducing the professional T-handle Tap Wrench from Facom. This type of wrench allows for turning taps to help make screw threads but can also be used with reamers, screw extractors and other tools with a square shank. The Facom 830A ...
Introducing the professional T-handle Tap Wrench from Facom. ...
Description:
Introducing the professional T-handle Tap Wrench from Facom. This type of wrench allows for turning taps to help make screw threads but can also be used with reamers, screw extractors and other tools with a square shank. The Facom 830A ...
High carbon steel, hardened & tempered for strength ...
Description:
High carbon steel, hardened & tempered for strength and durability. Precision machined to produce accurate thread forms.
All sets contain matching taps and dies. All ...
Description:
All sets contain matching taps and dies. All metric utilise 13/16in and 1in diecasts. Imperial set utilises 1in and 1 1/2in diecasts.