Countersinks

Countersink cutter drill bits are designed to fit directly into manual, electric and cordless drill driver attachments and have hexagonal or round shanks. Countersink cutters are used to create a chamfer around the rim of a pilot hole enabling the head of a countersunk screw to sit flush. Countersink cutters can also be used to remove the burr left from a drilling or tapping operation.


Types of Countersink Cutters



  • Cross-Hole Countersink Cutter: These have a hole that goes through the side of the cone that provides the cutting edge. These countersink cutters are suitable for deburring and can also be used in soft materials such as wood or plastic to create a countersunk hole. The design of these countersink cutters means that they are free from mechanical vibration or 'chatter' and they also stay in the centre.

  • Fluted Countersink cutter: These have fluted blades that produce a heavy chamfer to create the correct seating for a countersunk-head screw. Countersink cutters are available with six different cutting angles but the most common are 82° and 90°. The number of flutes on the countersink cutter can also vary.

  • Single fluted: These have less chatter or mechanical vibration than multi-fluted and are ideal for use in small holes for general-purpose countersinking, chamfering and deburring. These are designed for machine use and light portable work when operating at higher speeds.

  • Three fluted: These are designed for a chatter-free performance and are used mainly in portable applications at slower speeds. The design of these countersinks gives them a good centring ability.

  • Four fluted: These have good radial relief

  • Five Fluted: These have a rugged design and the odd number of flutes minimises chatter.

  • Six fluted: These are ideal for producing fast shearing cuts.


These countersink cutter drill bits are made from HSS (High-Speed Steel) which can withstand high temperatures without losing its hardness.


...
Read more Read less

Filters

Viewing 1 - 20 of 104 products
Results per page
Description Price Drill Bit Type Head Diameter Countersink Angle Number of Flutes Material Overall Length Number of Pieces Shank Diameter Shank Length Smallest Head Diameter Largest Head Diameter
RS Stock No. 218-595
BrandRS PRO
$27.53
Each
units
Countersink 12mm 90° 5 HSS - 1 - - - -
RS Stock No. 218-567
BrandRS PRO
$120.18
Each
units
Countersink Set 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm 90° 3 HSS - 6 - - - -
RS Stock No. 562-634
BrandRS PRO
$17.59
Each
units
Countersink 6mm 90° 5 HSS 45 mm 1 5 mm 35mm - -
RS Stock No. 218-551
BrandRS PRO
$19.52
Each
units
Countersink 6mm 90° 3 HSS - 1 - - - -
RS Stock No. 215-473
BrandRS PRO
$25.26
Each
units
Countersink 5mm 90° - HSS 45 mm 1 6 mm 45mm - -
RS Stock No. 673-8708
BrandRS PRO
$23.23
Each
units
Countersink 12.4mm 90° 3 HSS 56 mm 1 8 mm 41mm - -
RS Stock No. 673-8697
BrandRS PRO
$148.55
1 Set
Set(s)
Countersink Set 6.3 mm, 8.3 mm, 10.4 mm, 12.4 mm, 16.5 mm, 20.5 mm 90° 3 HSS - 6 - - - -
RS Stock No. 215-518
BrandRS PRO
$109.44
Each
units
Countersink Set 2 mm, 5 mm, 10 mm, 15 mm, 20 mm 90° - HSS - 4 - - - -
RS Stock No. 215-489
BrandRS PRO
$33.29
Each
units
Countersink 10mm 90° - HSS 48 mm 1 8 mm 30.5mm - -
RS Stock No. 215-467
BrandRS PRO
$123.64
Each
units
Countersink Set 2 mm, 5 mm, 10 mm, 15 mm, 20 mm 90° - HSS - 4 - - - -
RS Stock No. 218-573
BrandRS PRO
$34.99
Each
units
Countersink 20mm 90° 5 HSS - 1 - - - -
RS Stock No. 215-495
BrandRS PRO
$46.28
Each
units
Countersink 15mm 90° - HSS 65 mm 1 10 mm 37.5mm - -
RS Stock No. 673-8691
BrandRS PRO
$16.38
Each
units
Countersink 6.3mm 90° 3 HSS 45 mm 1 5 mm 35mm - -
RS Stock No. 423-810
BrandRS PRO
$21.93
Each
units
Countersink 10.4mm 90° 3 HSS 34 mm 1 7.15 mm 21.5mm - -
RS Stock No. 215-445
BrandRS PRO
$57.56
Each
units
Countersink 15mm 90° - HSS 65 mm 1 10 mm 37.5mm - -
RS Stock No. 215-423
BrandRS PRO
$24.21
Each
units
Countersink 5mm 90° - HSS 45 mm 1 6 mm 32mm - -
RS Stock No. 423-832
BrandRS PRO
$22.57
Each
units
Countersink 10.4mm 90° 5 HSS 31 mm 1 7.15 mm 21.5mm - -
RS Stock No. 673-8717
BrandRS PRO
$37.91
Each
units
Countersink 16.5mm 90° 3 HSS 63 mm 1 10 mm 42mm - -
RS Stock No. 673-8704
BrandRS PRO
$20.15
Each
units
Countersink 10.4mm 90° 3 HSS 50 mm 1 6 mm 36mm - -
RS Stock No. 423-848
BrandRS PRO
$41.68
Each
units
Countersink 14mm 90° - HSS 48 mm 1 7.15 mm 20mm - -
Related Products
RS PRO range of three and five flute ...
Description:
RS PRO range of three and five flute high sped steel (HSS) countersink drill bits that conform to DIN 335/C standard. 90° flutes for use with machines and portable tools. Three-flute designed to reduce clogging, improve clearance and be chatter ...
RS PRO range of three and five flute ...
Description:
RS PRO range of three and five flute high sped steel (HSS) countersink drill bits that conform to DIN 335/C standard. 90° flutes for use with machines and portable tools. Three-flute designed to reduce clogging, improve clearance and be chatter ...
Countersinks manufactured from premium Cobalt Steel for increased ...
Description:
Countersinks manufactured from premium Cobalt Steel for increased hardness/toughness, improved cutting edge strength and extended tool life. Hexagon shank design fits directly into cordless drill driver attachments for quick change. These counter sinks are designed for the production of 90° ...
Countersinks manufactured from premium quality high-speed steel for ...
Description:
Countersinks manufactured from premium quality high-speed steel for increased hardness/toughness, improved cutting edge strength and extended tool life. These counter sinks are designed for the production of 90° countersinks in most metals and features ground flats for positive location in ...