Countersinks

Countersink cutter drill bits are designed to fit directly into manual, electric and cordless drill driver attachments and have hexagonal or round shanks. Countersink cutters are used to create a chamfer around the rim of a pilot hole enabling the head of a countersunk screw to sit flush. Countersink cutters can also be used to remove the burr left from a drilling or tapping operation.


Types of Countersink Cutters



  • Cross-Hole Countersink Cutter: These have a hole that goes through the side of the cone that provides the cutting edge. These countersink cutters are suitable for deburring and can also be used in soft materials such as wood or plastic to create a countersunk hole. The design of these countersink cutters means that they are free from mechanical vibration or 'chatter' and they also stay in the centre.

  • Fluted Countersink cutter: These have fluted blades that produce a heavy chamfer to create the correct seating for a countersunk-head screw. Countersink cutters are available with six different cutting angles but the most common are 82° and 90°. The number of flutes on the countersink cutter can also vary.

  • Single fluted: These have less chatter or mechanical vibration than multi-fluted and are ideal for use in small holes for general-purpose countersinking, chamfering and deburring. These are designed for machine use and light portable work when operating at higher speeds.

  • Three fluted: These are designed for a chatter-free performance and are used mainly in portable applications at slower speeds. The design of these countersinks gives them a good centring ability.

  • Four fluted: These have good radial relief

  • Five Fluted: These have a rugged design and the odd number of flutes minimises chatter

  • Six fluted: These are ideal for producing fast shearing cuts


These countersink cutter drill bits are made from HSS (High-Speed Steel) which can withstand high temperatures without losing its hardness.


...
Read more Read less

Filters

Viewing 21 - 40 of 104 products
Results per page
Description Price Drill Bit Type Head Diameter Countersink Angle Number of Flutes Material Overall Length Number of Pieces Shank Diameter Shank Length
RS Stock No. 673-8691
BrandRS PRO
$19.24
Each
units
Countersink 6.3mm 90° 3 HSS 45 mm 1 5 mm 35mm
RS Stock No. 218-646
BrandRS PRO
$42.17
Each
units
Countersink 16mm 90° 3 HSS - 1 - -
RS Stock No. 423-848
BrandRS PRO
$41.68
Each
units
Countersink 14mm 90° - HSS 48 mm 1 7.15 mm 20mm
RS Stock No. 673-8717
BrandRS PRO
$40.26
Each
units
Countersink 16.5mm 90° 3 HSS 63 mm 1 10 mm 42mm
RS Stock No. 423-872
BrandRS PRO
$26.94
Each
units
Countersink 8.3mm 90° 3 HSS 32 mm 1 7.15 mm 21.5mm
RS Stock No. 215-495
BrandRS PRO
$46.28
Each
units
Countersink 15mm 90° - HSS 65 mm 1 10 mm 37.5mm
RS Stock No. 218-630
BrandRS PRO
$49.87
Each
units
Countersink 20mm 90° 3 HSS - 1 - -
RS Stock No. 673-8704
BrandRS PRO
$18.13
Each
units
Countersink 10.4mm 90° 3 HSS 50 mm 1 6 mm 36mm
RS Stock No. 218-573
BrandRS PRO
$34.47
Each
units
Countersink 20mm 90° 5 HSS - 1 - -
RS Stock No. 218-589
BrandRS PRO
$27.76
Each
units
Countersink 16mm 90° 5 HSS - 1 - -
RS Stock No. 215-439
BrandRS PRO
$35.04
Each
units
Countersink 10mm 90° - HSS 48 mm 1 8 mm 30.5mm
RS Stock No. 456-898
BrandRS PRO
$43.10
Each
units
Countersink 12mm - 3 HSS 120 mm 1 - -
RS Stock No. 218-618
BrandRS PRO
$121.58
Each
units
Countersink Set 6 mm, 8 mm, 10 mm, 12 mm, 16 mm, 20 mm 90° 5 HSS - 6 - -
RS Stock No. 218-624
BrandRS PRO
$65.01
Each
units
Countersink 25mm 90° 3 HSS - 1 - -
RS Stock No. 673-8701
BrandRS PRO
$20.02
Each
units
Countersink 8.3mm 90° 3 HSS 50 mm 1 6 mm 38mm
RS Stock No. 423-826
BrandRS PRO
$38.37
Each
units
Countersink 16.5mm 90° 3 HSS 40 mm 1 7.15 mm 21.5mm
RS Stock No. 218-652
BrandRS PRO
$29.81
Each
units
Countersink 12mm 90° 3 HSS - 1 - -
RS Stock No. 423-810
BrandRS PRO
$22.64
Each
units
Countersink 10.4mm 90° 3 HSS 34 mm 1 7.15 mm 21.5mm
RS Stock No. 218-674
BrandRS PRO
$28.01
Each
units
Countersink 8mm 90° 3 HSS - 1 - -
RS Stock No. 218-668
BrandRS PRO
$31.28
Each
units
Countersink 10mm 90° 3 HSS - 1 - -
Related Products
Set Contents. Counterbores - M3, M4, M5, M6, ...
Description:
Set Contents. Counterbores - M3, M4, M5, M6, M8, M10Pilot Drills - 3.5mm, 4.5mm, 6.5mm, 9.0mm, 11mm. Plain shank high speed steel counterbores. Polypropylene storage case.
HSS-E countersink with cylinder shaft. For rust-free steels ...
Description:
HSS-E countersink with cylinder shaft. For rust-free steels and + VA materials. Three cutters with radial rear vent for vibration-free work. For deburring, threading and weighting as per DIN 74.
HSS-E countersink with cylinder shaft. For rust-free steels ...
Description:
HSS-E countersink with cylinder shaft. For rust-free steels and + VA materials. Three cutters with radial rear vent for vibration-free work. For deburring, threading and weighting as per DIN 74.
From Wera this is the 846/8, 3-Flute, 8-piece ...
Description:
From Wera this is the 846/8, 3-Flute, 8-piece countersink bit set complete with a 1 / 4-inch drive suitable for power screwdrivers. The countersink set includes a Kraftform bit holding screwdriver, Rapidaptor universal bit holder, and 6 x 1 / ...